Sökning: "Nitrogen alloyed tool steel"

Hittade 3 uppsatser innehållade orden Nitrogen alloyed tool steel.

  1. 1. Nitrogen Without Oxygen : The effect of ferroalloys added after vacuum treatment on cleanliness of nitrogen-alloyed tool steel

    Master-uppsats, KTH/Materialvetenskap

    Författare :Leo Nilsson Hultén; [2021]
    Nyckelord :Tool steel; Electro-Slag Remelting ESR; Nitrogen Alloying; Ferroalloys; Nonmetallic Inclusions NMI; Verktygsstål; Elektroslaggomsmältning ESR; Kvävelegering; Ferrolegeringar; Ickemetalliska Inneslutningar NMI;

    Sammanfattning : Nitrogen-alloyed tool steel is made at Uddeholms AB by adding high-nitrogen ferroalloy after vacuum degassing where introduced impurities are hard to remove. In this thesis two types of high-nitrogen ferrochromium are compared, a solid version and a powder cored wire. LÄS MER

  3. 2. Alternative welding methods for nitrogen alloyed steel

    Uppsats för yrkesexamina på grundnivå, Örebro universitet/Institutionen för naturvetenskap och teknik

    Författare :Anders Bertilsson; [2017]
    Nyckelord :Nitrogen alloyed tool steel; Uddeholm Vanax SuperClean; solid-state welding; direct-drive friction welding; friction stir welding; microstructure; Vickers microhardness testing; retained austenite measurement by X-ray diffraction; Kvävelegerat verktygsstål; Uddeholm Vanax SuperClean; trycksvetsning; friktionssvetsning; friktionsomrörningssvetsning; mikrostruktur; Vickers mikrohårdhetsmätning; restaustenitmätning med röntgendiffraktion;

    Sammanfattning : This project explores the feasibility of the solid-state welding method direct-drive friction welding to be used as a joining method for the nitrogen alloyed steel Uddeholm Vanax SuperClean, produced via processes based on powder metallurgy. Vanax SuperClean cannot be welded using fusion welding methods where the base material melts, due to nitrogen escaping the material, resulting in inferior quality welds. LÄS MER

  4. 3. Effects of tempering on corrosion properties of high nitrogen alloyed tooling steels in pyrolysis oil

    Master-uppsats, KTH/Korrosionslära

    Författare :Ashkan Reza Gholi; [2011]
    Nyckelord :High nitrogen alloyed tooling steel; Pyrolysis; Tempering process; Primary and secondary chromium precipitates; Pitting corrosion; General corrosion;

    Sammanfattning : Nowdays biofuels are becoming a good alternative for petroleum fuels due to environmental issues like high carbon dioxide emission and increasing vehicles population, together with the high price and fast depletion of petroleum oils. This project aims to investigate the corrosive effects of wood Pyrolysis oil on a special grade of nitrogen alloyed tooling steels to be used for injector nozzles in Diesel engines, where high stress and strain encounter high acidity and corrosivity of the Pyrolysis oil and cause breakdown over short periods. LÄS MER