Sökning: "Scanning Electron Microscope SEM"

Visar resultat 1 - 5 av 126 uppsatser innehållade orden Scanning Electron Microscope SEM.

  1. 1. Characterisation of Non-metallic Inclusions in Special Steels using Electrolytic Extraction

    Master-uppsats, KTH/Materialvetenskap

    Författare :Josefin Mvele Svensson; [2024]
    Nyckelord :Non-metallic inclusions; electrolytic extraction; SEM; Icke-metalliska inneslutningar; elektrolytisk extraktion; SEM;

    Sammanfattning : When producing high strength special steels strict requirements are in place to assure the quality of the final product, both in terms of harmful elements and  the  content  of  non-metallic  inclusions  (NMI).  Achieving  cleanliness  is a  gradual  process  where all  the  steps  of  the  production  process  are  inter- connected, meaning that it is crucial to know the influence of each step in order to assure the contents of the final product. LÄS MER

  3. 2. Micromechanical Characterization of Thin Paper Materials

    Master-uppsats, Lunds universitet/Fasta tillståndets fysik; Lunds universitet/Fysiska institutionen; Lunds universitet/Lunds Tekniska Högskola

    Författare :Linus Bengtsson; [2023]
    Nyckelord :Micromechanical characterization; SEM; In situ tensile testing; Paper deformation; Fiber orientation; Paper mechanics; Technology and Engineering;

    Sammanfattning : Hur ser framtidens hållbara förpackning ut och vad är den tillverkad av? För att besvara denna fråga blir mikromekanisk karakterisering av material en viktig parameter att utforska och förstå. I synnerhet är mikromekaniken hos tunna pappersmaterial intressant då materialet har användningspotential i flera förpackningsapplikationer. LÄS MER

  4. 3. Microstructure and Mechanical Investigation ofCarbides Particles Reinforced High AusteniticManganese Steel

    Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Abderrahim Ait ouakrim; [2023]
    Nyckelord :Metal Matrix Composites MMCs ; Manganese steel; Carbides particles; Wear resistance;

    Sammanfattning : The objective of this study was to produce a metal matrix composite (MMC). This compositematerial proves highly suitable for scenarios involving abrasive wear, owing to the exceptionalhardness of carbide particles, in conjunction with the remarkable ductility and capacity for workhardening found in Hadfield steel. LÄS MER

  5. 4. Heteroepitaxial Growth of GaN Film on Si substrate by Magnetron Sputtering

    Master-uppsats, Linköpings universitet/Institutionen för fysik, kemi och biologi

    Författare :Zahra Mohammadianrasnani; [2023]
    Nyckelord :GaN; Sputter epitaxy; Thin film;

    Sammanfattning : In this study, the effect of AlN buffer layer structure and morphology on the GaN films deposited on Si (111) substrate by reactive DC magnetron sputtering have been studied. For structural and morphological characterization X-ray diffraction (XRD) and Scanning electron microscope (SEM) were used. LÄS MER

  7. 5. Fabrication and characterization of GaAsxP1-x single junction solar cell on Si for III-V/Si tandem solar cell

    Master-uppsats, KTH/Tillämpad fysik

    Författare :Elaheh Aghajafari; [2023]
    Nyckelord :III-V semiconductor; GaAsxP1-x heteroeputaxy; hydride vapor phase epitaxy; III-V Si solar cell; III-V halvledare; GaAsxP1-x epitaxiallager; hydridångfasepitaxi; III-V Si solcell;

    Sammanfattning : Silicon based solar cells have been used as photovoltaic devices for decades due to reasonable cost and environment- friendly nature of silicon. But the conversion efficiency of silicon solar cell is limited; for instance, the maximum conversion efficiency of a crystalline silicon solar cell available in the market developed by Kaneka Corporation is 26 % [1]. LÄS MER