Sökning: "Sintering time"

Visar resultat 1 - 5 av 33 uppsatser innehållade orden Sintering time.

  1. 1. The Application of Multivariate Statistical Process Control during Industrial Hot Isostatic Pressing Sintering Processes : A Case study at Seco Tools AB

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för ekonomi, teknik, konst och samhälle

    Författare :Karl Ericsson; [2023]
    Nyckelord :Multivariate statistical process control; Batch processes; Quality prediction;

    Sammanfattning : This Master's thesis focuses on improving the understanding and monitoring of the Hot Isostatic Pressing (HIP) sintering process used by Seco Tools AB to manufacture cemented carbides for cutting tools. While essential for producing cutting tools with superior hardness and toughness the HIP sintering process introduces a complex relationship between the selected process parameters and the achieved materials properties. LÄS MER

  3. 2. Wire and Arc Additive Manufacturing : Topology Optimised Vehicle Component

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Malte Petersson; [2022]
    Nyckelord :Wire and Arc Additive Manufacturing; Additive Manufacturing; WAAM; AM; Overhang; Cooling times; Simulation; Welding;

    Sammanfattning : Wire and arc additive manufacturing (WAAM) is a manufacturing method using a numerical controlled motion system and a welding system to additively manufacture three dimensional components. The motion system is programmed from three dimensional computer aided design model data (3D-CAD) of the intended geometry which is then sliced in to layers and welded on additively. LÄS MER

  4. 3. Improving Availability of the Pelletization Process

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för ekonomi, teknik, konst och samhälle

    Författare :Emil Andreasson; Pontus Åhman; [2022]
    Nyckelord :Availability; Predictive Maintenance; Pelletization; Statistical Process Control; Refractory Material; DMAIC;

    Sammanfattning : The Grate-Kiln-Cooler process is a commonly used method of sintering during iron ore pelletization, where the pellets are formed, dried, and hardened. The pellets are oxidized in the rotating Kiln, turning magnetite (Fe3O4) to hematite (Fe2O3), making the pellets attain suitable metallurgical attributes for further processing. LÄS MER

  5. 4. Process development and optimization towards binder jetting of Vanadis 4 Extra

    Master-uppsats, Uppsala universitet/Institutionen för materialvetenskap

    Författare :Jivesh Jain; [2022]
    Nyckelord :Binder jetting; tool steel; Vanadis 4 Extra; sintering; debinding; wear resistance;

    Sammanfattning : Additive manufacturing (AM) has experienced significant growth and development in recent years, owing to the ability to produce complex parts using a wide range of materials with relative ease. Powder bed-based metal AM has been at the forefront of this growth, even reaching the point where parts can be manufactured for end-use applications. LÄS MER

  7. 5. Additive Manufacturing of Strain Gauges : A Study of the Feasibility of Printing Strain Gauges Using Inkjet Printing

    Master-uppsats, Uppsala universitet/Institutionen för materialvetenskap

    Författare :Karin Wennersten; [2022]
    Nyckelord :Additive manufacturing; strain gauge; inkjet; IJP; AJP; aerosol jet;

    Sammanfattning : Additive manufacturing (AM) also commonly known as 3D-printing is a manufacturing method which creates parts from adding layer into another. In the field of printed electronics Inkjet printing (IJP) and Aerosol Jet printing (AJP) are the most common AM techniques. LÄS MER