Sökning: "effective width method"
Visar resultat 1 - 5 av 20 uppsatser innehållade orden effective width method.
1. Emulsifying properties of cellulose oxalate and pectin from Norway spruce bark
Uppsats för yrkesexamina på grundnivå, KTH/Skolan för kemi, bioteknologi och hälsa (CBH)Sammanfattning : Nanocellulose is a sustainable material and has shown interesting properties in various applications. One such application is Pickering emulsion, where the nanocellulose stabilizes the oil and water interface. LÄS MER
2. Laser Scattering for Fast Characterization of Cellulose Filaments
Kandidat-uppsats, KTH/Fiber- och polymerteknologiSammanfattning : Cellulosananofibriller (CNFs) hör till naturens mest fundamentala byggstenar och förser naturliga material, såsom den yttre cellväggen i trä, med en otrolig styrka och styvhet. Genom att imitera träets arkitektur öppnas möjligheter upp för tillverkning av nya, biobaserade och lättviktiga strukturella material med mekaniska egenskaper som överskrider de för glasfiber, metaller och legeringar. LÄS MER
3. An investigation of detecting potholes with UAV LiDAR and UAV Photogrammetry
Kandidat-uppsats, Högskolan i Gävle/SamhällsbyggnadSammanfattning : Potholes are caused by erosion and as such always emerging on our roadnetwork. Potholes may not only cause great damages to vehicles, but can alsocause road accidents, which in the worst case are fatal. LÄS MER
4. Metoder för identifiering och kvalitetsbestämning av lax- och öringhabitat
Master-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknikSammanfattning : Vattenkraftens ska förses med moderna miljövillkor i linje med miljöbalken. Ett av underlagen som föreslås vara nödvändigt inför prövningen är kännedom var det finns strömmande vatten och olika typer av habitat, något som inte finns i alla avrinningsområden. LÄS MER
5. Local Buckling of Doubly-Symmetric I-Sections Subjected to Warping Torsion : The limitations of the Reduced Cross-Section Method under unconventional loading
Master-uppsats, KTH/Bro- och stålbyggnadSammanfattning : In regular design practice, when it comes to conventional loading, such as uniaxial compression and bending, the local buckling of thin plates is taken care of through cross section classification. The effect of warping torsion, which also gives rise to normal stresses in the section, however, is typically not considered in the process. LÄS MER