Sökning: "electrical pulsing"
Hittade 4 uppsatser innehållade orden electrical pulsing.
1. Electrical Pulsing of a Laser Diode for Usage in Fluorescence Microscopy
Master-uppsats, Linköpings universitet/Elektroniska Kretsar och SystemSammanfattning : A relatively new application for the laser is in fluorescence microscopes. The fluo- rescence microscope needs a high power light source input. Using a laser source improves the precision of the microscope. A pulsed laser source enhances the performance of the fluorescence microscope and a laser diode can be overdriven without being damaged. LÄS MER
2. High Voltage Pulsed Power Converters for the ESS Linear Accelerator.
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Industriell elektroteknik och automationSammanfattning : Material science has become an important research area in order to fulfill today’s requirements on lighter, cheaper and more sustainable materials. The European spallation source is a research center based on the world’s most powerful neutron source, which will enable new possibilities to evaluate material properties down to an atomic level. LÄS MER
3. Pressure Control of a Pneumatic Actuator Using On/O Solenoid Valves
Uppsats för yrkesexamina på avancerad nivå, KTH/ReglerteknikSammanfattning : Nowadays a very important aspect in heavy duty vehicles is the braking system. The braking system can be divided into EBS brakes, exhaust brake and retarder, where the latter is of interest in the present Master's Thesis. This thesis presents an investigation whether it is possible to substitute today's concept, i.e. LÄS MER
4. Modeling and Control of Retarder using On/Off Solenoid Valves
Uppsats för yrkesexamina på avancerad nivå, KTH/ReglerteknikSammanfattning : The Retarder is one of the main components in Scania's trucks' braking system and is used to brake down the truck and for maintaining a steady speed on descents. This Master's Thesis aims to investigate if the current system which uses a proportional valve to control the air pressure in the Retarder, can be replaced with two on/o® solenoid valves and a pressure chamber to control the air pressure, which would result in a cheaper and more robust system. LÄS MER