Sökning: "filament"

Visar resultat 21 - 25 av 100 uppsatser innehållade ordet filament.

  1. 21. Mechanical properties of viscose filament : Made from recycled cotton textile and softwood dissolving pulp

    Master-uppsats, Karlstads universitet/Institutionen för ingenjörs- och kemivetenskaper (from 2013)

    Författare :Sanne Karlsson; [2022]
    Nyckelord :Recycled cotton textile; recycled textile; dissolving pulp; wood dissolving pulp; softwood; viscose dope; viscose filament; the viscose process; spinning process; Återvunnen bomullstextil; återvunnen textil; dissolvingmassa; trädissolvingmassa; barrved; viskos dop; viskosfilament; viskosprocessen; spinningprocess;

    Sammanfattning : The textile industry is one of the largest industries in the world and it causes up to 10 % of the global greenhouse gas emissions. With large environmental issues of cotton- and oil-based textiles, other options are explored such as man-made fibers producing fibers like viscose and lyocell. LÄS MER

  3. 22. Design of 3D-Printed Components : Resistances, Strain Gauges and Touch sensors

    Master-uppsats, KTH/Skolan för elektroteknik och datavetenskap (EECS)

    Författare :Joar Forsberg; [2022]
    Nyckelord :3D-printing; FFF; Conductive PLA; Strain Gauge; Touch sensor; 3D-printing; FFF; Konduktiv PLA; Töjningsgivare; Vidröringssensor;

    Sammanfattning : Additive manufacturing has recently become an increasingly available, affordable, and versatile technology for industry and enthusiasts alike. One opportunity that this provides is using conductive filament to print electronic sensors and components. LÄS MER

  4. 23. Design of a filament fuser : Reducing 3D-printer filament waste

    Magister-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Omar Kanbour; [2022]
    Nyckelord :3D-printer; splicing filament; firmware; sustainability; mechatronics; 3D-printer; filamentsvetsning; mjukvara; hållbarhet; Mekatronik;

    Sammanfattning : There has been a significant rise of users in the 3D-printer community. A common dilemma amongst users is how to handle spools of plastic filament that does not contain enough filament for an arbitrary print. LÄS MER

  5. 24. Fabrication of 3D-Printable Filament using Recycled Thermoplastics and Recycled Fillers

    Master-uppsats, Uppsala universitet/Institutionen för materialvetenskap

    Författare :Nithin Nagendra; [2022]
    Nyckelord :;

    Sammanfattning : This degree project was performed in collaboration with ECORUB AB. Polymeric materials like thermoplastic and rubber are produced in massive quantities all over the world. However, the percentage of items that are recycled is quite low. LÄS MER

  7. 25. Adapting FDM 3D-printing for the manufacture of microfluidic devices

    Master-uppsats, Lunds universitet/Avdelningen för Biomedicinsk teknik

    Författare :Oskar Andersson; [2021]
    Nyckelord :3D-printing; addative manufacturing; fused deposition modelling; FDM; fused filament fabrication; FFF; microfluidics; microfluidic devices; lab-on-a-chip; microchannels; micro-channels; resolution; settings; Technology and Engineering;

    Sammanfattning : Microfluidic devices have so far not seen widespread use, even though they could potentially be cheaper, better and faster than traditional methods. A possible reason for this is the lack of a middle step between one-of-a-kind experimental devices and cheap mass produced devices. LÄS MER