Light Stabilisation of Photochromic Prints

Sammanfattning: Light stabilisation of photochromic dyes is seen as the most challenging part in the development of photochromic dyes. The aim of this research is to compare stabilisation methods and their effect on the lifetime of a photochromic print on textile. The vision is to create a textile UV-sensor that detects current UV light exposure in the surroundings and alarms the wearer by showing colour. The developed inks have been formulated for ink-jet printing as a novel production method with resource saving properties. UV-LED light curable ink formulations were prepared for two dye classes; a non-commercial spirooxazine, a commercial spirooxazine (Oxford Blue) and a commercial naphthopyran (Ruby Red). Two different stabilisation methods were applied; chemically by incorporation of hindered amine light stabilisers and physically by polyurethane coating. Fatigue tests were performed to evaluate and compare the stabilisation methods. The tests included were household washing, multiple activations and intensive sun-lamp exposure. As a result it was found that Oxford Blue and spirooxazine had an initial better resistance to photodegradation than Ruby Red. The coating reduced the ability of colour development in higher extend for Oxford Blue and spirooxazine compared to Ruby Red. Moreover, the photocolouration increased with the number of activations for Oxford Blue and spirooxazine in particular. In general, the physically stabilised samples showed a better or similar fatigue resistance compared to chemically stabilised samples. On the other hand the results are weak in significance. It is concluded that the developed coating method in combination with further optimising has potential.