Variationer i stegljudsnivå från 20 Hz på grund av mätmetod och utförande i flerbostadshus med trästomme
Sammanfattning: Abstract In this report studies have been made about variations in impact sound insulation from 20 Hz in an industrial, prefabricated, light weight apartment building. The building was constructed by Lindbäcks Bygg AB. Variations was determined from measurement method from SS16283-2:2015 and due to the workmanship of the structure. The different measurement methods from SS16283-2:2015 was also analyzed, the difference in sound pressure level and measurement uncertainty was checked. The objective with this report is to verify if the current standard is adaptable for measurement from 20 Hz in a prefabricated apartment building. Also verifying the standard and if possible make the procedure of measurement more effective. Measurement of sound insulation were executed in 12 apartments. The apartment was of the same prefabricated module. From the measurements the impact sound insulation was calculated and was presented in both measurement methods and from 20 Hz. Variations of impact sound insulation was quantitated from 20 Hz with one normalized value for a simulated reverberation time under 50 Hz and one without correction of reverberation under 50 Hz. The calculated value of variation due to the measurement method was not of some significant difference, this indicate the current standard is adaptable for measurements from 20 Hz. The variation due to workmanship was quantitated, but no statistical analyze could be made cause lack amount of measurements. A significant difference in sound pressure level was identified between measurement methods, this was assumed to be caused by the room modes.
HÄR KAN DU HÄMTA UPPSATSEN I FULLTEXT. (följ länken till nästa sida)