Influence of Potassium on Gasification Performance

Sammanfattning: To release energy from chemically stored energy in the biomass was the new investigation in recent years. Utilizing of biomass for this purpose occur in two different ways, directly by burning (combustion) the biomass and indirectly by pyrolysis process which will convert the biomass to three main products, bio- tar, bio- char and synthetic gas. Biomass contains different amount of inorganic compound, especially alkali metals which causes some diverse impacts on combustion, pyrolysis and gasification process such as corrosion, agglomeration and fouling problems. This project aims to investigate the effect of K2CO3 on the pyrolysis and gasification processes of three different types of fuel; wood pellets, forest residue pellets and synthetic waste pellets at three different temperatures, 750 °C, 850 °C and 900 °C respectively. The purpose of this work to study and clarify the influence of K2CO3 on char yield, tar yield and tar compositions and the gasification rate and the reactivity of different fuels char. The pyrolysis process was carried out in a fluidized bed reactor during 2 minutes and the products were tar, char and synthetic gas. In this project interested in char and tar only. Char yield calculated and the results shows the char yield increase with increasing of [K2CO3]. While the tar analysis carried on GC- MS instrument at HB to study the tar yield and compositions. The results showed that potassium carbonate has not so much effect on tar yield and its composition. The last part was gasified the char in TGA with steam and CO2 as oxidizing media to study the influence of [K2CO3] on gasification rate and the reactivity of char samples at different temperatures. The result showed the [K2CO3] has inhibitory effect on gasification rate and the reactivity.