Sökning: "3D numerical modelling"
Visar resultat 1 - 5 av 36 uppsatser innehållade orden 3D numerical modelling.
1. Rock Wedge Stability Assessment : A Comparative Analysis of Limit Equilibrium and Discrete Element Methods
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Rock wedge stability is a common concern in underground excavations. Since the wedge stability influences the support design, it is important to use a wedge stability analysis method that can capture factors like excavation geometry, joint parameters and properties, rock mass properties, rock cover, and stress field as accurately as possible. LÄS MER
2. Multiscale & Multiphysics Modelling of Thrust Pad (Air) Bearings
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Without lubrication, machines are not imaginable to perform over a long period of time and complete their designated operations. With its omnipresent availability, the air is capable of functioning as a lubricant in long operations very efficiently. Moreover, thrust bearings support axial loads and transmit power at the same time under heavy loads. LÄS MER
3. Analys av sättningar genom 3D-modellering av provbank på MC-förstärkt lera
Master-uppsats, KTH/Jord- och bergmekanikSammanfattning : The purpose of the thesis is to numerically and analytically predict settlements from a test embankment constructed on MC-reinforced clay in Täby Park. The thesis also provides a description of how the test embankment should be instrumented to enable comparison with the calculated settlements. LÄS MER
4. Numerical Modelling of a Packed Bed Thermal Energy Storage for Applications in a Carnot Battery : KTH Thesis Report
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : This thesis explores the heat transfer characteristics of a packed bed thermal energy storage device through the development of a 3D model in COMSOL Multiphysics. The model is based on a laboratory-scale device consisting of an aluminum box filled with sand, which acts as the thermal storage medium. LÄS MER
5. Numerical modelling and testing of 3D-printed samples in carbon-filled PLA under bending load
Kandidat-uppsats,Sammanfattning : .... LÄS MER