Sökning: "3D-printed concrete"

Visar resultat 1 - 5 av 6 uppsatser innehållade orden 3D-printed concrete.

  1. 1. Loading tests on composite concrete columns : A comparison between composite columns made of permanent 3DPC formwork filled with SCC and columns made of homogenous SCC

    Master-uppsats, KTH/Betongbyggnad

    Författare :Abdulla Al-Bazarkan; Hussain Alahmad; [2023]
    Nyckelord :;

    Sammanfattning : In order to achieve increased sustainability when casting concrete structures this thesis investigates the possibility of utilizing 3D-printing to construct formwork and digitalize construction. By digitizing construction less workers are needed and therefore less capital. LÄS MER

  3. 2. Automatiserad Konstruktion : Kan detta vara ett miljövänligare svar på dagens bostadsocharbetskraftsbrist?

    Uppsats för yrkesexamina på grundnivå, Mittuniversitetet/Institutionen för naturvetenskap, design och hållbar utveckling (2023-)

    Författare :Anna Isabel Wilcoxen; [2023]
    Nyckelord :3DP construction; concrete; sustainability; housing; 3DP-konstruktion; betong; hållbarhet; bostad;

    Sammanfattning : Traditionella byggmetoder har använts sedan de tidigastecivilisationerna och är både kostsamma och ineffektiva. Dagensbygg- och anläggningsindustri är en av de största bidragsgivarnatill utsläpp av växthusgaser. LÄS MER

  4. 3. Samverkande bropelare av kvarsittande 3D-utskriven betongform & igjuten SKB

    Kandidat-uppsats, KTH/Byggteknik och design

    Författare :Elias Bahdi; Mahdi Hassani; [2023]
    Nyckelord :;

    Sammanfattning : In summary, this study demonstrates the potential of using 3D-printed concrete forms to innovate the use of concrete. By eliminating the need for traditional wooden or steel molds, both time and materials can be saved. LÄS MER

  5. 4. Simulation of load capacity of 3D printed concrete patterns

    Master-uppsats, KTH/Betongbyggnad

    Författare :Magnus Burton; Karolina Näsén; [2022]
    Nyckelord :;

    Sammanfattning : Three-dimensional concrete printing (3DCP) is a technology which has rapidly developed in recent years. The technology is based on a layer-by-layer technique where models are designed in a 3D software program and printed by a robot. Unlike conventional concrete, 3DCP has stricter material requirements due to the absence of formwork. LÄS MER

  7. 5. Performance of 3D printed concrete formworks for bridge pillars focusing on casting

    Kandidat-uppsats, KTH/Betongbyggnad

    Författare :Sergi Boned Ferrer; [2021]
    Nyckelord :3D technology; formwork; casting; bridge pillars; bond;

    Sammanfattning : In this context, the main objective of this project is to determine if 3D printed concreteformworks are able to not fall apart and later withstand the stresses produced byC40/50 and selfcompactingconcrete (SCC) castings. The purpose is to check thesuitability of this method applied to the construction of bridge pillars and its capabilityof covering and protecting the reinforcement placed in the casting. LÄS MER