Sökning: "Alloying Elements"

Visar resultat 1 - 5 av 44 uppsatser innehållade orden Alloying Elements.

  1. 1. Investigation of the Microstructure of Plastically Deformed Cemented Carbide

    Master-uppsats, KTH/Materialvetenskap

    Författare :Felicia Larsson; [2023]
    Nyckelord :;

    Sammanfattning : During machining operation, cemented carbide tools are exposed to high loads and temperatures, which eventually leads to plastic deformation of the tool material. The aim of this work was to investigate if the microstructures of creep deformed micro grain cemented carbides can be linked to alloying elements and mechanical properties. LÄS MER

  3. 2. Influence from temperature variations in stacking fault energy on the mechanical properties of stainless steels

    Kandidat-uppsats, KTH/Materialvetenskap

    Författare :Christopher Hallén; Marcus Johansson Storne; [2023]
    Nyckelord :;

    Sammanfattning : This paper investigates the mechanical properties and deformation mechanisms of austenitic stainless steels and how they relate to the material property of stacking fault energy (SFE) and its relation to temperature and nickel content. Austenitic stainless steels are commonly used and well known for good mechanical properties and deformation characteristics. LÄS MER

  4. 3. Tuning Photovoltaic Properties of Two-dimensional Molybdenum Disulfide by Alloying: An ab initio study

    Master-uppsats, KTH/Materialvetenskap

    Författare :Mochen Li; [2023]
    Nyckelord :Photovoltaic; Molybdenum disulfide; Absorption coefficient; ab initio material design; Fotovoltaisk; Molybdendisulfid; Absorptionskoefficient; ab initio materialdesign;

    Sammanfattning : Addressing the urgent need for innovative energy solutions amidst increasing environmental concerns, the focus on photovoltaic solar cells is intensifying. Currently limited by the Shockley-Queisser limit, conventional silicon-based solar cells offer a maximum power conversion efficiency of 32%. LÄS MER

  5. 4. Simulation and Experimental Based Hardenability Evaluation of Chromium Alloyed Powder Metal Steels

    Master-uppsats, KTH/Materialvetenskap

    Författare :Atharva Kotasthane; [2023]
    Nyckelord :Hardenability; Martensite; Simulation Modelling; Microhardness; Microstructure; Härdbarhet; Martensit; Simuleringsmodellering; Mikrohårdhet; Mikrostruktur;

    Sammanfattning : Powder metallurgy is a branch of metal forming technology where metal powders are used to manufacture parts and components. It is a flexible and economical technique for manufacturing complicated shapes. This present work focuses on press and sinter technology and forms a part of Höganäs’s efforts of modelling hardenability through quenching. LÄS MER

  7. 5. Macrosegregation Prediction in Continuously Cast Steel Slabs

    Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Malek Al-Ameri; [2022]
    Nyckelord :;

    Sammanfattning : A prediction model [3] of macrosegregation in continuously cast steel slabs developed by Barber et al from Corus Teesside Technology Centre, UK as an extension of the work of Miyazawa and Schwerdtfeger [4] is presented in this thesis. Improvements have been made in the model to include the effect of many bulges between the supporting rolls induced by the ferrostatic pressure exerted on the solidifying shell by the liquid phase, which were approximated following a deflection of an elastic beam model. LÄS MER