Sökning: "Bar modeling"

Visar resultat 1 - 5 av 22 uppsatser innehållade orden Bar modeling.

  1. 1. Visualization, modeling and consequences of residual stresses in glass frit sealing of a UV light source

    Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Mikrosystemteknik

    Författare :Vilma Hurtigh Grabe; [2023]
    Nyckelord :bonding; micro system; glass frit; sealing; finite element; modeling; glass; mikrosystem; sammanfogning; glasfog; fog; finita element; modellering; glas;

    Sammanfattning : PureFize Technologies AB develops and manufactures a broadband ultraviolet (UVC) light technology device that is mercury-free and based on nanotechnology, using the principle of field emission. The light source is made of Ti and glass, which are hermetically bonded, using a low-temperature glass frit, at elevated temperatures. LÄS MER

  3. 2. Modeling of a Hydraulic Rock Drill for Condition Monitoring

    Master-uppsats, Linköpings universitet/Fordonssystem

    Författare :Adam Kagebeck; Mahdi Najafi; [2022]
    Nyckelord :Condition Monitoring System; Hydraulic Rock Drill; Diagnostic; Modeling; State Space Model;

    Sammanfattning : This thesis aims to investigate the possibility of using a mathematical model to detect several common faults in a hydraulic rock drill. To this end, a parameterized state space model of the hydraulic drill, which simulate its behavior, is created. LÄS MER

  4. 3. Developing a supervised machine learning model for an optimised aluminium addition based on historical data analytics, for clean steelmaking

    Master-uppsats, KTH/Materialvetenskap

    Författare :Arun Kumar Thakur; [2022]
    Nyckelord :Clean steelmaking; Data analytics; De-oxidation; Machine learning; Ren ståltillverkning; Dataanalys; Deoxidation; Maskininlärning;

    Sammanfattning : De-oxidation is an important process in clean steelmaking. Al (Aluminium) is mainly used as de-oxidant and controls the final oxygen content and impact the sulphur removal in steel. Adding optimum amount of Al is critical for steel cleanliness and to reduce cost. LÄS MER

  5. 4. Co-Simulation Development for Improved Cavitation Predictions in Oil-Hydraulics Systems : An investigation into the cavitating flow behavior of repetitive water hammers.

    Master-uppsats, Linköpings universitet/Mekanisk värmeteori och strömningslära

    Författare :Thisal Mandula Sugathapala; Twan Bakker; Rahul Gudur Suresh; Aryan Delir; [2022]
    Nyckelord :co-simulation; water hammer; cavitation;

    Sammanfattning : Numerical modeling of cavitation using computational software is a highly pursued topic of research due to its impact in different industrial sectors. While some industrial applications such as wastewater treatment and mineral processing are known to advantageously use this phenomena, it remains an unwanted process in others where it is known to induce vibration, reduce performance and cause structural damage. LÄS MER

  7. 5. Shear Failure of Steel Fiber and Bar Reinforced Concrete Beams Without Stirrups : Predictions based on Nonlinear Finite Element Analyses

    Master-uppsats, KTH/Betongbyggnad

    Författare :David Andersson; [2022]
    Nyckelord :Nonlinear finite element analysis; Shear failure; Fiber reinforced concrete beams; ATENA;

    Sammanfattning : Shear failure in concrete beams are often brittle in nature and potentially dangerous without adequatereinforcing measures. In design of concrete, it is commonly recommended to install transversalreinforcement along the shear span to induce a more ductile structural response, improving the shearcapacity all together and providing sufficient warning prior to collapse. LÄS MER