Sökning: "CVD coating"
Visar resultat 1 - 5 av 21 uppsatser innehållade orden CVD coating.
1. SFEER Hydrogen Permeation : Finding a suitable coating for the PA6 liner
Kandidat-uppsats, Uppsala universitet/Institutionen för materialvetenskapSammanfattning : Water Stuff & Sun are developing a hydrogen battery based on a technology called SFEER’s. The SFEER’s are spherical high-pressure gas storage containers that are the size of a tennis ball. They consist of a carbon fiber-shell that is lined on the inside with a polymer called PA6. LÄS MER
2. Chromia-Alumina Thin Films from Alkoxide Precursors : From Precursor Synthesis to Deposition and Characterisation
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Oorganisk kemiSammanfattning : A hetero-bimetallic alkoxide CrAl3(OiPr)12 was synthesised through metathesis of achromium(III)chloride THF complex (CrCl3 . 3 THF) and 3 KAl(OiPr)4.It was used as a single sourceprecursor to make oxide powders and films with 1:3 chromium/aluminium compositionthrough sol-gel synthesis. LÄS MER
3. Evaluation of Refined Tribological Properties of Diamond Coated Cutting Tools Used in Machining of High-Strength Aluminum Alloys : Master thesis report regarding refined frictional & wear behavior of uncoated & CVD diamond coated WC-Co cemented carbide cutting tools used for machining of Al 7xxx alloys.
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : High strength aluminum alloys have for a long time been a popular material utilized in the automotive and aerospace sector due to coveted mechanical properties in terms of weight, strength, fatigue, and corrosion. However, tribological mechanisms such as tribo-film formation and material transfer during the metal cutting manufacturing process of aluminum impose significant reduction of machining and tool-life performance. LÄS MER
4. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy
Master-uppsats, Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)Sammanfattning : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. LÄS MER
5. Temperature effect on insert tool life in dry machining
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : This thesis work researched the temperature effects the insert tool life. This was examined through physical laboratory testing with designed milling tools and temperature simulations in ANSYS. The designed milling tools altered the temperature in the insert through external parameters like design and material. LÄS MER
