Sökning: "Crack removal"
Visar resultat 1 - 5 av 8 uppsatser innehållade orden Crack removal.
1. Drop-weight impact tests on reinforced concrete beams
Master-uppsats, KTH/BetongbyggnadSammanfattning : This master's thesis aimed to investigate the behaviour of reinforced concrete beams under dynamic loading conditions, specifically focusing on understanding shear failure. The study was conducted with KTH Royal Institute of Technology, the Swedish Fortifications Agency, and Tyréns. LÄS MER
2. Spänning- och flödessimulering av en högtrycksångventil
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : Ventiler utgör en avgörande roll i det industriella samhället och används flitigt inom områden som säkerhet, filtrering och reglering av flöden. Säkerställandet av hållbarhet och drift av ventilen är därför ytters viktigt. Ventilen som undersöks har fyra packningsringar gjord av grafit. LÄS MER
3. Alternativ till konventionell ovanjordsprängning i tätbebyggda områden
Uppsats för yrkesexamina på grundnivå, Uppsala universitet/Byggteknik och byggd miljöSammanfattning : For many constructions works, the removal of bedrock is required as an initial part of the production. Removing bedrock is complicated, takes a lot of time and entails many risks due to the vibrations that occur during the detonation. The risk of damaging nearby properties is impending. LÄS MER
4. Arbetsgång efter brand i en kulturhistorisk byggnad : Med fokus på återställandet av konstruktionen
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : I aktuellt läge [2019] brister Sverige på att tillhandahålla förberedande planer för eventuella brandolyckor i byggnader med kulturhistoriskt värde. Brandolyckor på kulturminnesmärkta byggnader är inte frekventa och det saknas en standardiserad metod på hur återställandet kan hanteras efter en brandolycka på ett produktivt och hållbart sätt. LÄS MER
5. Surface Treatment of Softwood Lignin Based Carbon Fibers for Enhanced Interfacial Adhesion : Effects of Plasma Treatment Parameters on the Creation of Surface Groups
Master-uppsats, Luleå tekniska universitet/MaterialvetenskapSammanfattning : Lightweight design is an essential part of lowering CO2 emission, which is one of the mostimportant challenges that the automotive industry is facing today. Carbon fiber reinforcedplastics offer an enormous potential for replacing heavier structural materials like steel andaluminum, however due to their high cost and scarcity, carbon fibers are not a very feasibleoption to use in high volume production applications. LÄS MER