Sökning: "DAQ"
Visar resultat 1 - 5 av 38 uppsatser innehållade ordet DAQ.
1. Temp-validering av PCR-utrustning : MATLAB-applikation och användbarhetstest
Uppsats för yrkesexamina på grundnivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : Polymeras Chain Reaction (PCR) är i dagens samhälle ett oumbärligt verktyg förlaboratorie- och analysverksamhet. Avdelningarna Genetik och Mikrobiologi på Norrlands universitetssjukhus har sammanlagt ca 25 PCR-utrustningar som alla är i behov av regelbundna kontroller. LÄS MER
2. Architectural Constraints in Data Acquisition Design
Master-uppsats, Linköpings universitet/Datorteknik; Linköpings universitet/Tekniska fakultetenSammanfattning : Replacing a data acquisition system (DAQ) is a substantial and long-term investment. Siemens Energy’s R&D department is considering a new DAQ system. The equipment should be relevant for at least ten years. The system performance needs to reflect today’s requirements but also consider those of the future. LÄS MER
3. Constructing and commissioning of a Multi-Grid neutron detector prototype for the European Spallation Source
Master-uppsats, Lunds universitet/Kärnfysik; Lunds universitet/Fysiska institutionen; Lunds universitet/European Spallation Source ESS ABSammanfattning : A prototype of a novel 10B-based neutron detector called the Multi-Grid detector has been constructed, tested and commissioned for the European Spallation Source (ESS). The detector is constructed after the specifications set by the CSPEC instrument at ESS and is therefore called the CSPEC Multi-Grid detector. LÄS MER
4. Boiling heat transfer of multiple impinging water jets on a hot rotary cylinder
Magister-uppsats, Högskolan i Gävle/Avdelningen för byggnadsteknik, energisystem och miljövetenskapSammanfattning : Quenching technique is widely used in industrial applications as it enhances the mechanical properties of metals such as hardness and tensile strength. This technique consists of a heating process followed by fast cooling which results in different microstructures that enhance the metal behavior. LÄS MER
5. Styrning av servomotor med LabVIEW och DAQ-kort
M1-uppsats, KTH/Hållbar produktionsutveckling (ML)Sammanfattning : På KTH-Södertälje finns laborationsutrustning som inte har använts på länge. Utrustningen som behandlats i detta examensarbete är ett antal servobord. Ett servobord har en servomotor som roterar en cirkulär platta. Plattan är försedd med vita fält och en visare, och på utsidan av plattans omkrets finns markörer för olika vinklar. LÄS MER