Sökning: "Desktop simulator"

Visar resultat 1 - 5 av 9 uppsatser innehållade orden Desktop simulator.

  1. 1. Classification of Flying Qualities with Machine Learning Methods

    Master-uppsats, KTH/Flygdynamik

    Författare :Ola Isaksson; [2021]
    Nyckelord :Flying Qualities; Machine Learning; Flight Mechanics; Flygkvaliteter; Maskininlärning; Flygmekanik;

    Sammanfattning : The primary objective of this thesis is to evaluate the prospect of machine learning methods being used to classify flying qualities based on simulator data (with the focus being on pitch maneuvers). If critical flying qualities could be identified earlier in the verification process, they can be further invested in and focused on with less cost for design changes of the flight control system. LÄS MER

  3. 2. Influence of Design Parameter Variation on Fighter Agility Metrics

    Master-uppsats, KTH/Flygdynamik

    Författare :Albin Karlsson; [2020]
    Nyckelord :;

    Sammanfattning : Metrics that quantify fighter aircraft performance is an active research topic, and agility metrics seek to measure performance previously not captured with classic point performance metrics. Agility metrics are researched to be used in analysis with an advanced desktop simulator and investigate the effects of design parameter variation. LÄS MER

  4. 3. Methodology For Evaluating Flying Qualities From Desktop Simulator

    Master-uppsats, Luleå tekniska universitet/Rymdteknik

    Författare :Daniel Lindqvist; [2020]
    Nyckelord :Flying qualities; Desktop simulator; Flight control system;

    Sammanfattning : A modern ghter aircraft has an advanced ight control system which highly augmentsthe control inputs from the pilot. To verify a new iteration of the control system is a timeconsuming and expensive task. LÄS MER

  5. 4. Realization of a serially-linked haptic device

    Master-uppsats, KTH/Maskinkonstruktion (Inst.)

    Författare :Ramtin Massoumzadeh; [2017]
    Nyckelord :haptic device; spatial haptics; simulator; serially-linked; cable transmission; IMU; hall effect sensor; sensors; tandkirurgi; simulator; haptik; haptisk enhet; serielänkad;

    Sammanfattning : Spatial haptic interfaces have existed for more than 20 years but have not been widespread despite promising applications. The few devices found in the market as of today are either considered costly, of higher quality and produced in smaller series or mass-produced and cheap, but of lower quality. LÄS MER

  7. 5. Enhancement of the Mechatronic Development Process with Software in the loop Simulation : An embedded control case study

    Master-uppsats, KTH/Maskinkonstruktion (Inst.)

    Författare :Karin Fåhraeus; [2015]
    Nyckelord :;

    Sammanfattning : This master thesis is performed at the mechatronic department at the company Mycronic, which are responsible for the embedded software in their pick and place machines. Today the embedded code can be executed and tested on a PIL simulation, where the control code runs on the actual target processor and the dynamic of the system (plant model) is modeled by a mathematical equation implemented as a C-function on the target board. LÄS MER