Sökning: "Drops"

Visar resultat 1 - 5 av 327 uppsatser innehållade ordet Drops.

  1. 1. Predicting inflow and infiltration to wastewater networks based on temperature measurements

    Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Institutionen för informationsteknologi

    Författare :Martin Åsell; [2024]
    Nyckelord :Inflow and Infiltration; I I; CNN; Linear regression;

    Sammanfattning : Sewer pipelines are deteriorating due to aging and sub optimal material selections, leading to the infiltration of clean ground and rainfall water into the pipes. It is estimated that a significant portion (up to 40-50%) of the water entering wastewater treatment plants is actually clean infiltrated water. LÄS MER

  3. 2. Off-State Stress Effects in AlGaN/GaN HEMTs : Investigation of high-voltage off-state stress impact on performance of and its retention in hybrid-drain ohmic gate AlGaN/GaN HEMTs

    Master-uppsats, KTH/Skolan för elektroteknik och datavetenskap (EECS)

    Författare :Ivan Krsic; [2023]
    Nyckelord :HEMT; GaN; off-state stress; memory effects; drain leakage current; dynamic RDSon; threshold voltage instabilities; charge redistribution; HEMT; GaN; stress i avslaget tillstånd; minneseffekter; läckströmmen; dynamisk RDSon; instabiliteten hos styrets tröskelspänning; omfördelningen av laddningar;

    Sammanfattning : High electron mobility transistors (HEMTs) realized using AlxGa1-xN/GaN are relatively new technology which is prominent for high-speed and high-power applications. Some of the main problems with this technology were identified as dynamic RDSon, current collapse and threshold voltage instabilities due to the off-state stress. LÄS MER

  4. 3. High-Temperature Thermal Energy Storage for Innovative Hybrid CSP/PV Plants : A Comprehensive Design Optimization

    Master-uppsats, KTH/Energiteknik

    Författare :Lorenzo Centonze; [2023]
    Nyckelord :;

    Sammanfattning : By means of a literature review, critical parameters in the context of thermal energy storage systems, particularly packed bed thermal energy storage systems are identified. The goals of this thesis project are to come up with an optimized design for a PBSTES and to evaluate the thermal performance of alternative storage materials derived from byproducts of industrial processes and natural rocks in order to reduce the environmental impact of the designed system. LÄS MER

  5. 4. Effect of temperature on early stage adhesion during TiAlN sliding against Inconel 718 and Stainless steel 316L : High temperature tribology

    Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Ahsan Ali; [2023]
    Nyckelord :High temperature tribology; Early-stage adhesion; Adhesive wear; Friction; Wear resistant coatings; Physical vapour deposition PVD coatings; TiAlN; Tungsten carbide WC Co ; Difficult to machine super alloys; Inconel 718; Stainless steel 316L; High-performance materials; Abrasion; Oxidation; Chipping; Ploughing; Characterization;

    Sammanfattning : High-performance materials such as stainless steels and nickel based super alloys are widely used in demanding applications where high mechanical and thermal properties are required. The applications of super alloys are mainly found in jet engines, power plants and gas turbines demanding high fatigue strength, corrosion and oxidation resistance as well as wear resistant properties. LÄS MER

  7. 5. Techno-economic analysis and simulation of low temperature district heating networks

    Master-uppsats, Lunds universitet/Avdelningen för Energi och byggnadsdesign; Lunds universitet/Institutionen för arkitektur och byggd miljö

    Författare :Ilia Iarkov; [2023]
    Nyckelord :Low-temperature district heating; Modelica; BTES; LCA; LCC; Technology and Engineering;

    Sammanfattning : The continuous increase in global energy consumption has led to a greater focus on the energy required for heating buildings. This thesis presents a techno-economic model for analysing low-temperature district heating networks coupled with a geothermal heat source. LÄS MER