Sökning: "Energy Dispersive Spectroscopy"
Visar resultat 11 - 15 av 93 uppsatser innehållade orden Energy Dispersive Spectroscopy.
11. Continuous Hydrothermal Co-liquefaction of Biomass : An experimental study on the effects of fuel mixing on the composition and yield of biocrude and hydrochar
Uppsats för yrkesexamina på avancerad nivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : An experimental study on the effect of fuel mixing on the products resulting from hydrothermal liquefaction (HTL) was conducted. The feedstocks used were kraft lignin (KL), GROT (GT) and microalgae cultivated in wastewater (MA). Three sets of mixtures were prepared, each containing two types of feedstocks with a 1:1 ratio: KLGT, MAKL, and MAGT. LÄS MER
12. Phase and Interface Design in Potential Earth-Abundant Multi-Component Photocatalysts
L3-uppsats, Lunds universitet/Kemiska institutionenSammanfattning : Transition metal phosphides are low-cost, earth-abundant semiconductors with promising properties for photocatalysis, including water-splitting. When combined with other semiconductors or noble metals in nanoparticles, their photocatalytic performance can be drastically enhanced. LÄS MER
13. Multi-spectral X-ray imaging with a laser-plasma accelerator
Master-uppsats, Lunds universitet/Atomfysik; Lunds universitet/Fysiska institutionenSammanfattning : This master thesis focuses on the creation of an algorithm to perform multispectral imaging of a metallic target using X-rays. The generation of an ultrashort high-power low-divergent X-ray beam is performed by means of a Ti:Sapphire laser driven wake-field plasma accelerator. LÄS MER
14. Polymerized Tubular Silicates in Lower Cambrian Carbonates – Biology or Chemistry?
Kandidat-uppsats, Uppsala universitet/Institutionen för geovetenskaperSammanfattning : Shallow marine environments from the Lower Cambrian period were very different to shallow marine environments of today. Tubes of what was thought to be silica recovered from a partly dolomitized carbonate sample collected form a site near Indian Springs, Nevada could help further understand the chemistry and characteristics of such environments. LÄS MER
15. Characterization of surface defects caused by ultrasonic cleaning of aluminium
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : This master thesis studies the behaviour of two aluminium alloys in ultrasonic cleaning at two different intensities, as well as the effect of a cleaning solution, Formula 815 GD-NF on the same surface have been studied with respect to surface roughness and material composition. Methods like Light Optical Microscopy (LOM), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and 3D topography using white light interferometry (VSI) was used to study the surface and material composition. LÄS MER