Sökning: "Energy Dispersive Spectroscopy"
Visar resultat 16 - 20 av 93 uppsatser innehållade orden Energy Dispersive Spectroscopy.
16. Correlation between microstructure and fatigue cracks in cast aluminium alloy A205
Kandidat-uppsats, Jönköping University/Tekniska HögskolanSammanfattning : Materials research in the aerospace industry is, among other things, focused on reducing the weight and increasing the life of components. Materials with high strength and long lifespan are therefore examined. LÄS MER
17. Abrasionsmekanismer i labtest och fält : Utvärdering av metoder för nötningsprovning av spetsar till pinnkultivatorer
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : In this master thesis two simplified and small-scale methods for two-body and three-body abrasive wear were examined. It was examined how representative the methods were compared to field-tested points in a cultivator for agriculture. A total of six points with different compositions were tested and ranked based on the test results. LÄS MER
18. Evaluation of different non-metallic inclusions in steel chips by using electrolytic extraction : Evaluation of a methodology for electrolytic extraction and scanning electron microscopy - energy dispersive spectroscopy (SEM-EDS) analysis
Kandidat-uppsats, KTH/MaterialvetenskapSammanfattning : Analysing non-metallic inclusions (NMI) by conventional microscopy is prone to errors. Better imaging can be achieved by using electrolytic extraction (EE) to effectively dissolve the metal matrix, freeing the inclusions so that they can be collected on a filter. LÄS MER
19. Surface Engineering of Bipolar Plates for PEM-Water Electrolysis : Cost-Effective Corrosion Protection
Master-uppsats, Linköpings universitet/TunnfilmsfysikSammanfattning : Hydrogen production by PEM-Water electrolysis is an environmentally benign and promising approach to store excess energy from renewable energy sources but facing drawbacks of high costs, mainly due to a harsh cell-environment. The aim of my Master Thesis was to reduce the costs of the most expensive cell component, the bipolar plate by surface engineering. LÄS MER
20. Characterization of phases in Argon Oxygen Decarburization slag
Kandidat-uppsats, KTH/MaterialvetenskapSammanfattning : Slag is an important part of steelmaking with the AOD (Argon Oxygen Decarburization) process. In this work the focus was on developing a methodology for characterizing phases in slagsamples obtained after decarburization, reduction and desulphurization. LÄS MER