Sökning: "Erik Sandvik"
Visar resultat 1 - 5 av 14 uppsatser innehållade orden Erik Sandvik.
1. Long term aging and creep exposure for advanced heat resistant alloys : A phase analysis
Kandidat-uppsats, Uppsala universitet/Institutionen för materialvetenskap; Uppsala universitet/Institutionen för kemi - ÅngströmSammanfattning : This project was ordered by Sandvik Materials Technology and was performed by a group of students at Uppsala university. The purpose of the project was to study precipitation behavior and structure stability in six advanced heat resistant alloys. Each sample were subjected to a creep rupture test in 600 or 700°C depending on the alloy type. LÄS MER
2. Gruppinriktat stöd : En studie om högstadielärares stödinsatser pågruppnivå
Uppsats för yrkesexamina på avancerad nivå, Umeå universitet/Pedagogiska institutionenSammanfattning : The aim of this paper was to study Swedish secondary school teachers’ thoughts on and experiences of support measures that do not fall under the categories defined in the Swedish Education Act. The existing defined support measures are constructed as adaptations forindividual students and therefore this study looked at support measures implemented on a group basis. LÄS MER
3. Tool wear in turning of titanium alloy Ti–6Al–4V : Challenges and potential solutions for crater wear, diffusion and chip formation
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : Titanium alloys are major materials used in the airplane industry, and prospects show that airplane production will double in the next 20 years. Consequently, the demand for cutting tools for machining of titanium alloys will increase. The primary problem when machining titanium alloys is their low thermal conductivity. LÄS MER
4. Optimering av lagerstyrning för pressverktygstillverkning : Reduktion av bundet kapital genom simulerande optimering vid Sandvik Coromant, Gimo
Uppsats för yrkesexamina på avancerad nivå, Umeå universitet/Institutionen för matematik och matematisk statistikSammanfattning : AB Sandvik Coromant är en världsledande tillverkare av skär och verktyg för skärande bearbetning. Gimoverken är Sandvik Coromants största skärtillverkande enhet. GHMP är en avdelning som förser skärtillverkningen på Gimoverken, och även andra produktionsenheter runt om i världen, med pressverktyg. LÄS MER
5. The effect of argon stirring on separation of oxidic inclusions in the ladle furnace at Sandvik Materials Technology AB
Master-uppsats, KTH/MaterialvetenskapSammanfattning : The effect of gas stirring in the ladle furnace on inclusion content in austenitic and duplex stainless steel has been investigated at Sandvik Materials Technology AB. The effect was mainly investigated by varying duration of stirring time and intensity of stirring. LÄS MER