Sökning: "Fracture strain"
Visar resultat 1 - 5 av 59 uppsatser innehållade orden Fracture strain.
1. Influence from temperature variations in stacking fault energy on the mechanical properties of stainless steels
Kandidat-uppsats, KTH/MaterialvetenskapSammanfattning : This paper investigates the mechanical properties and deformation mechanisms of austenitic stainless steels and how they relate to the material property of stacking fault energy (SFE) and its relation to temperature and nickel content. Austenitic stainless steels are commonly used and well known for good mechanical properties and deformation characteristics. LÄS MER
2. Bedömning av prediktiv förmåga för Finita Elementberäkningar med optisk töjningsmätning (DIC)
Kandidat-uppsats, Högskolan i Borås/Akademin för textil, teknik och ekonomiSammanfattning : The goal of this thesis is to improve the predictive capability of Finite element (FE) by gathering data from experimental test and implement the characteristics into the material model that is used. FE is a commonly used method to predict the mechanical behavior of materials and components during applied forces. LÄS MER
3. Experimental Testing of EPS-foam
Master-uppsats, KTH/HållfasthetsläraSammanfattning : The aim of this master thesis was to investigate the mechanical properties of ExpandedPolystyrene (EPS) through experimental testing. The strain was measured on thespecimen’s surface with Digital Image Correlation (DIC), in order to investigate howthe first principal strain at fracture initiation depends on the loading of the material. LÄS MER
4. Numerical Modelling of Combined Forming and Punching of Sheet Metal for Heat Exchanger Applications
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Hållfasthetslära; Lunds universitet/Institutionen för byggvetenskaperSammanfattning : In this work a strategy for numerical simulation of punching during concurrent pressing of stainless steel sheet metal has been investigated accounting for the stress triaxiality and Lode angle parameter. Modelling of the damage evolution of a sheet metal is a useful tool within the field of engineering and materials science, and can provide useful information regarding material capabilities in a design process. LÄS MER
5. Effect of Proton Irradiation on the Mechanical Properties of Fe-10Cr-4Al in Liquid Lead
Master-uppsats, KTH/FysikSammanfattning : Among the structural materials under consideration for future lead-cooled fastreactors, special attention is paid to ferritic Fe-10Cr-4Al due to its superior corrosionand erosion protective properties, as well as its insensitivity to liquid metalembrittlement in liquid lead. This thesis gives an inside look into the radiation damageproperties of the alloy and the possible embrittlement scenarios. LÄS MER