Sökning: "HPDC"

Visar resultat 1 - 5 av 11 uppsatser innehållade ordet HPDC.

  1. 1. Relationship between Fatigue Properties and Surface Treatment of Aluminum Alloy

    H-uppsats,

    Författare :Umair Ali Khan; Soroosh Zahedi; [2023-09-14]
    Nyckelord :Corrosion resistance; Fatigue; Aluminium alloys; HPDC; PMC; Sheet Metal; Anodization Molding; Casting;

    Sammanfattning : Corrosion has posed a significant challenge within the maritime sector for numerousyears. In the 21st century, bolstering the corrosion resistance of alloys, particularlyaluminum alloys, has become paramount. Aluminum alloys find widespread use inpropulsion systems, boat hulls, and cargo vessels. LÄS MER

  3. 2. Energy efficiency of smelting of scrap aluminium in HPDC facilities : Available and upcoming technologies

    Master-uppsats, Linköpings universitet/Energisystem

    Författare :Bogdan Radu Racsi; [2023]
    Nyckelord :high pressure die casting; HPDC; energy efficiency; cast house remelting; internal aluminium scrap; melting furnace; melting and holding furnace; drivers; barriers;

    Sammanfattning : The aluminium industry is anticipated to witness a surge in demand, with projectionsof a two to three-fold increase by 2050. Meeting environmental objectives andaddressing the growing emphasis on sustainability from both the industry andconsumers seeking eco-friendly products present significant challenges. LÄS MER

  4. 3. Alloy adaptation towards accepting higher amounts of secondary material

    Master-uppsats, Jönköping University/JTH, Material och tillverkning

    Författare :Nikhil Itagi; Shubham Kadam; [2022]
    Nyckelord :Aluman-16; Phase diagram; Phases; Microstructure; ThermoCalc; Intermetallic; Fractography.;

    Sammanfattning : The work presented aims to find microstructure and mechanical properties after remelting of aluman-16 alloy by using high pressure die casting (HPDC). Alloy has been casted with specific composition. The alumna-16 alloy has been casted in 2 different composition of different Si content of 0.22% and 0. LÄS MER

  5. 4. A pre-study for functional coatings evaluated on light metals to be applied on a new HPDC Mg-alloy : Investigating tribological and thermophysical properties, as-cast and coated

    Master-uppsats, Jönköping University/JTH, Industriell produktutveckling, produktion och design

    Författare :Louise Albo Zieme; Pontus Bergstedt; [2021]
    Nyckelord :reciprocating dry sliding wear test; thermophysical test; NiP-SiC; Ni-SiC; functional coatings; progressive scratch test; adhesion; magnesium alloy; aluminium alloy; hardness.;

    Sammanfattning : Magnesium with two-thirds of the density compared to aluminium and one-quarter of steel, intrigues product developers and material scientists due to the light metal’s excellent combination of strength to weight ratio as well as their capability of being produced as a High Pressure Die Cast component compared to other ferrous or light metal alloys.   However, a magnesium alloy inherits some concerning drawbacks, limiting the exploitation in structural applications and mechanical design such as automotive, heavy machinery and aerospace components. LÄS MER

  7. 5. En Jämförelse Mellan Rheogjutning Och Konventionell Pressgjutning Med Vakuum. : Vid Tillverkning Av Aluminiumkomponenter.

    M1-uppsats, Jönköping University/JTH, Material och tillverkning

    Författare :Marisa Ling Brännlund; Hanna Martinsson; [2021]
    Nyckelord :semi-solid; rheocasting; rheogjutning; pressgjutning med vakuum; gjutning; RheoMetal;

    Sammanfattning : The car industry is constantly under pressure to be competitive in their product development which includes not only safety and increased performance, but also in their environmental impact. Volvo Cars strives to be more environmental and high performing in their product development, which of course includes manufacturing methods since these highly effect a components environmental impact and mechanical performance. LÄS MER