Sökning: "Heatsink."

Visar resultat 1 - 5 av 8 uppsatser innehållade ordet Heatsink..

  1. 1. Improving the Robustness, Thermal and Noise Performance of a Radio Transmitter Fan Tray

    Master-uppsats, KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanik

    Författare :Mattias Olausson; Selma Rahman; [2022]
    Nyckelord :Fan tray; Heat dissipation; Robustness; Radio transmitter; Noise performance; Fläktlåda; Värmeavledningsförmåga; Robusthet; Radio sändare; Ljudprestanda;

    Sammanfattning : With the growing demand of compact radio transmitters, so do the need for silent and efficient thermal management systems. Given the restricted form-factor, ensuring robustness of a unit with a detachable fan tray imposes a challenge. LÄS MER

  3. 2. Life Cycle Cost Analysis of two high temperature cooling systems supplied by geothermal energy : A Case Study in Sant-Cugat, Spain

    Master-uppsats, KTH/Betongbyggnad

    Författare :John Alexandersson; [2022]
    Nyckelord :;

    Sammanfattning : Energy efficiency in the building sector is an important matter all over the world. The business of energy efficiency is especially highlighted in the European Union, where several directives and projects are directed to increase the knowledge and encourage and force property owners to implement new energy efficient solutions. LÄS MER

  4. 3. Multicolor 3D printing : An analysis of the characteristics of multicolor 3Dprinting

    Kandidat-uppsats, KTH/Mekatronik

    Författare :Davron Patkhullaev; Yonas Melake; [2021]
    Nyckelord :Mechatronics; 3D printer; Arduino Mega; Diamond Hotend; Marlin; Mekatronik; 3D printer; Arduino Mega; Diamond Hotend; Marlin;

    Sammanfattning : 3D printing has risen in popularity due to its capabilities which enable rapid prototyping and printing structures that were impossible to produce before and partially because of technological development in recent years. Most low-cost printers, based on the fused filament fabrication process, are capable of printing a single filament at a time that limits and complicates multicolor and multi-material 3D printing. LÄS MER

  5. 4. ADAPTION OF A HEATSINK TO ADDITIVE MANUFACTURING. : INCLUDING A GUIDE TO INDUSTRIAL STARTUP OF AM.

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Richard Ingman; [2019]
    Nyckelord :Additive Manufacturing; AM; 3D printing; Industrialization; Heatsink.; Additiv Tillverkning; 3D-printning; Industrialisering; Kylare.;

    Sammanfattning : This thesis is an investigation of the current status of additive manufacturing (AM) regarding different technologies, the level of implementation in industry and the future obstacles for further implementation. As a secondary objective, an existing heatsink for electronic equipment was redesigned, adapted to and improved using the design advantages of AM, and was later manufactured through 3D-printing in aluminium (AlSi10Mg). LÄS MER

  7. 5. EVALUATING THE ORGANIC RANKINE CYCLE (ORC) FOR HEAT TO POWER : Feasibility and parameter identification of the ORC cycle at different working fluid with district waste heat as a main source.

    M1-uppsats, Mälardalens högskola/Framtidens energi

    Författare :Salman Mohamad; [2017]
    Nyckelord :Organic Rankine cycle; Recuporator; regenerative; heat-to power; working fluids; low temperature heat; power generation;

    Sammanfattning : New technologies to converting heat into usable energy are constantly being developed for renewable use. This means that more interactions between different energy grid will be applied, such as utilizing low thermal waste heat to convert its energy to electricity. LÄS MER