Sökning: "Horizontal natural frequency"
Hittade 5 uppsatser innehållade orden Horizontal natural frequency.
1. A parametric study of the static and dynamic performance of timber arch footbridges with different hanger configurations
Master-uppsats, KTH/Bro- och stålbyggnadSammanfattning : The influence of the hanger configuration in the arch and deck bending moments under asymmetric loads is widely used nowadays for improved designs of arch bridges. In this work, by means of a parametric study, those hanger configurations that most efficiently increase both the natural frequencies and buckling factors are identified, simultaneously evaluating the dynamic and static performance of timber arch footbridges. LÄS MER
2. Horizontal natural frequency in a 10 story building : A comparison between CLT and concrete using estimate calculations
Uppsats för yrkesexamina på grundnivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : Tall slender buildings are easily set in motion by wind and earthquakes but by estimating the buildings horizontal natural frequencies in the design phase, these motions can be kept within acceptable boundaries. There are many parameters that decides the natural frequency of a building and it can therefore be difficult to calculate it. LÄS MER
3. KL-träbjälklag i kombination med stålstommar : Teknisk utvärdering och utveckling av lösningar för förband och längre spännvidder
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Byggkonstruktion och -produktionSammanfattning : En i dagsläget vanlig byggteknik i Sverige är användandet av en stålstomme i kombination medprefabricerade betonghåldäck. Detta arbete grundar sig på frågeställningen om KL-träbjälklag skullekunna vara ett reellt alternativ till betongbjälklag i en sådan konstruktion, i kombination medhattbalkar. LÄS MER
4. Aeroelastic Simulation of small wind turbine using HAWC2
Master-uppsats, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : Horizontal axis wind turbines are subjected to various static and dynamic loads under different load situations. Aeroelastic modelling is used in wind turbines to couple the aerodynamic and structural loads acting on the turbine and to analyse the aeroelastic response. The small wind turbine Nimbus 1. LÄS MER
5. Infästning av byggnadsmonterat vindkraftverk
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/ByggnadsmekanikSammanfattning : In order to better utilize the wind in urban areas, small-scale wind-turbines can be retro-fitted on existing buildings. However, wind-turbines are as structures very prone to oscillate. LÄS MER