Sökning: "Kärnbränsle"
Visar resultat 1 - 5 av 47 uppsatser innehållade ordet Kärnbränsle.
1. Improved Modelling For Oxidation Of Zircalloy Fuel Cladding Tubes In PWRs
Master-uppsats, KTH/FysikSammanfattning : The fuel cladding is an essential component in the defence-in-depth strategy for nuclear safety. Its integrity and durability are therefore critical for maintaining acceptable safety conditions. However, the integrity of the cladding can be compromised during normal operation due to corrosion and hydriding. LÄS MER
2. Deep Neural Networks as SurrogateModels for Fuel Performance Codes
Kandidat-uppsats, Uppsala universitet/Tillämpad kärnfysikSammanfattning : The core component of a nuclear power plant is the reactor and the fuel rods that supply it with fission fuel. Efficient and safe energy extraction is thus highly dependent on the reactor design and the conditions of the fuel rods. To anticipate high-quality operation and potential risks in advance, one must perform simulations on the fuel rods. LÄS MER
3. Experimental studies of radiation damage in uranium nitride
Master-uppsats, KTH/FysikSammanfattning : The effect of proton (H+) irradiation on uranium mononitride (UN) and UN compositefuel with 10 at.% ZrN (UN10at%ZrN) was examined. Protons of 2 MeV with fluences of1E17, 1E18, 1E19 and 1E20 ions/cm2 were accelerated towards the fabricated samples in orderto investigate the evolution of the micro-structure. LÄS MER
4. Modellering, simulering och analys av kärnreaktorn BWRX-300
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad kärnfysikSammanfattning : The demand for fossil-free energy production is rising due to electrification and increased consumption in the energy system. There are also multiple climate goals to reach, to preserve the possibilities of a sustainable future. LÄS MER
5. Dimensioning study of EPR2 fuel pool cooling system
Master-uppsats, KTH/FysikSammanfattning : The PTR system allows the EPR2 fuel pool to be cooled. The evacuation of the residual power fromthe pool is ensured by several heat exchangers and pumps, which have to be dimensioned in order to meetdifferent requirements.In order to dimension them, the worst-case scenario of the components must first be determined. LÄS MER