Sökning: "Master thesis mechanical products"
Visar resultat 11 - 15 av 41 uppsatser innehållade orden Master thesis mechanical products.
11. Study of Compound Casting of Aluminum Alloy/Ductile Iron Bimetal : Final Report of Thesis Project, Product Development and Materials Engineering (Master Programme)
Master-uppsats, Jönköping University/JTH, Material och tillverkningSammanfattning : Today’s transportation highly depends on hydrocarbon fuels, and reducing the weight could help a lot in reducing the air pollutants and carbon footprints in the environment to comply with the strict regulations set by reputable standard organizations in the world. Utilizing lightweight materials in automobile parts is one of the key factors to succeed in meeting the goals defined in the standards. LÄS MER
12. Exploring the Possibilities of Replacing Mechanics with Magnets
Master-uppsats, Lunds universitet/InnovationSammanfattning : This master thesis investigates the possibilities of implementing magnets for several functions in a knob. The project was carried out in collaboration with Sigma Connectivity. During a previous project at Sigma Connectivity, there occurred an interest in using mag-nets in a product called ”the knob”. LÄS MER
13. Recycling of concrete waste with wood waste through heating compaction
Master-uppsats, KTH/BetongbyggnadSammanfattning : Concrete, as primary building material, is widely used in most construction project. For this reason, large amounts of concrete waste were generated from construction and demolition. One way to reuse concrete waste is to use it as backfill material for landfilling and road bases. LÄS MER
14. The development of equipment to measure and monitor wear inside gun barrels : Application of the product development process
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : The gun barrel is one of the most important parts of the whole artillery system. During firing, the wear leads to reduced performance and availability. Wear in gun barrels has different types of erosion mechanisms, in particular chemical-, thermal- and mechanical erosion. LÄS MER
15. 3D-Printed Injection Molds
Master-uppsats, Lunds universitet/InnovationSammanfattning : This master thesis describes the development process of a prototyping process. It was carried out in collaboration with Axis Communications. When creating plastic prototypes, development engineers usually have two options, 3D-printing or injection molding using a soft tool. LÄS MER