Sökning: "Mike Olsson"
Hittade 5 uppsatser innehållade orden Mike Olsson.
1. Sensitivity analysis of a generic urban flow model : 2D modelling with empirical hyetographs and CDS rain
Master-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknikSammanfattning : Severe flooding events in recent years have underlined the importance of accurate hydrological modelling in urban areas. There are many important parameters relating to both the rainfall distribution and properties of the land on which the rain falls that controls the impacts of the rain event. LÄS MER
2. Flow simulation in MIKE URBAN based on high-resolution X-band radar data
Master-uppsats, Lunds universitet/Avdelningen för Teknisk vattenresursläraSammanfattning : Radar har använts sedan 1940-talet för att mäta och övervaka nederbörd. Under de senaste åren har X-bandradarn visat sig vara ett verktyg som kan förbättra indata till avrinningsmodellering inom urbana avrinningsområden. Detta tack vare sin höga upplösning i tid och rum jämfört med andra radarer som används vid nederbördsmätning. LÄS MER
3. The influence of storm movement and temporal variability of rainfall on urban pluvial flooding : 1D-2D modelling with empirical hyetographs and CDS-rain
Master-uppsats, Uppsala universitet/Luft-, vatten- och landskapsläraSammanfattning : Pluvial floods are formed directly from surface runoff after extreme rain events. Urban areas are prone to suffer from these floods due to large portions of hardened surfaces and limited capacity in the stormwater infrastructure. Previous research has shown that catchment response is influenced by the spatio-temporal behaviour of the rainstorm. LÄS MER
4. Utveckling av metod för översvämningskartering
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Luft-, vatten- och landskapsläraSammanfattning : The creation of reliable flood extent maps is becoming an increasingly important question as the damage caused by natural disasters is becoming more severe and the frequency of these events is increasing. By limiting the uncertainty in flood modelling and simplifying the creation of flood extent maps, a more iterative process is made possible. LÄS MER
5. Produktions- och konstruktionsanalys av acceleratortekniska komponenter
Master-uppsats, Lunds universitet/Industriell ProduktionSammanfattning : A particle accelerator consists of a large number of components, which among other things includes several acceleration modules, which consists of one or several cavities. A cavity is a complex and essential part in the accelerations process and is usually made of oxygen-free copper (OFC) or niobium. LÄS MER