Sökning: "MoS2"

Visar resultat 1 - 5 av 16 uppsatser innehållade ordet MoS2.

  1. 1. Additives in a steam engine to decrease friction : Friction testing of solid lubricants in powder form

    Master-uppsats, Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Författare :Viktor Lange; [2023]
    Nyckelord :Tribology; friction; wear; steam; steam engine; ranotor; invencon; invencon AB; steel; contact mechanics; hexagonal boron nitride; molybdenum disulfide; tungsten disulfide; lubricants; solid lubricants; Tribologi; friktion; nötning; ånga; ångmotor; stål; kontaktmekanik; smörjning; smörjmedel; fasta smörjmedel;

    Sammanfattning : This thesis aims to investigate the coefficient of friction between steel on steel contacts with the addition of solid lubricants such as h-BN, WS2, MoS2 in powder form, in dry conditions and wet conditions. More specifically, the purpose is to enhance the sliding between the piston rings and cylinder block in a modern high temperature steam engine developed by RANOTOR. LÄS MER

  3. 2. Tuning Photovoltaic Properties of Two-dimensional Molybdenum Disulfide by Alloying: An ab initio study

    Master-uppsats, KTH/Materialvetenskap

    Författare :Mochen Li; [2023]
    Nyckelord :Photovoltaic; Molybdenum disulfide; Absorption coefficient; ab initio material design; Fotovoltaisk; Molybdendisulfid; Absorptionskoefficient; ab initio materialdesign;

    Sammanfattning : Addressing the urgent need for innovative energy solutions amidst increasing environmental concerns, the focus on photovoltaic solar cells is intensifying. Currently limited by the Shockley-Queisser limit, conventional silicon-based solar cells offer a maximum power conversion efficiency of 32%. LÄS MER

  4. 3. Characterization of NiMo catalysts with noble metal promoters

    Master-uppsats, Lunds universitet/Kemiteknik (CI)

    Författare :Filip Hallböök; [2023]
    Nyckelord :Catalysis; Hydrodeoxygenation; TPR; NiMo-catalysts; Chemical engineering; Chemistry;

    Sammanfattning : To be able to face the challenges brought on by climate change there is an urgent need to reduce the heavy dependence on fossil fuels. Bio-oil is one such renewable and carbon-neutral replacement that has shown promising potential. A key step in making bio-oil commercially feasible is improvements of the upgrading processes of the bio-oil. LÄS MER

  5. 4. A study of the triboelectricity of 2D materials: MoS2, WS2 and MoO3 : Analyzing measurements from a triboelectric nanogenerator

    Kandidat-uppsats, Mittuniversitetet/Institutionen för naturvetenskap

    Författare :Simon Kilman; [2022]
    Nyckelord :2D-material; MoS2; WS2; MoO3; triboelektrisk nanogenerator; TENG; triboelektrisk effekt; triboelektrisk serie; kontaktelektrifiering.;

    Sammanfattning : Detta projekts mål har varit att undersöka tre olika 2D-materials triboelektriska egenskaper och därmed placera dem i en triboelektrisk serie. Detta utfördes genom att använda en triboelektrisk nanogenerator (TENG) och mäta den resulterande spänningen. Tio stycken motmaterial applicerades mot varje 2D-material på nanogeneratorn. LÄS MER

  7. 5. Tribological behaviour of metal sulfides UHMWPE composites in dry lubrication

    Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Bruno Pizone Vaz; [2021]
    Nyckelord :Polymer composites; polymer tribology; dry lubrication; UHMWPE; metal sulfides; tribology;

    Sammanfattning : The increasing worldwide demand for more eco-friendly materials with improved tribo- logical properties has expanded the interest in research on polymer as an alternative for conventional metal/metal contacts under dry lubrication. Specifically, UHMWPE, a semi-crystalline polymer, has shown interesting tribological properties for low demanding applications, allied with excellent recyclability, manufacturability and low cost. LÄS MER