Sökning: "Numerical stability"

Visar resultat 1 - 5 av 170 uppsatser innehållade orden Numerical stability.

  1. 1. Adapted data collection in field utilizing RMR and the Q-system

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Författare :Amanda Olsson; [2024]
    Nyckelord :Rock mass classification; Q-slope; SMR; Slope stability;

    Sammanfattning : The focus on slope stability has increased rapidly in Norway over the last years due to several unwanted landslides. In Norway, the most used method today to classify the rock mass and to determine the required reinforcement, is the Q-system. In addition to that the RMR method is also a commonly used method. LÄS MER

  3. 2. Rock Wedge Stability Assessment : A Comparative Analysis of Limit Equilibrium and Discrete Element Methods

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Författare :Vilma Nordh; [2024]
    Nyckelord :Numerical modelling; wedge stability; 3DEC; UnWedge;

    Sammanfattning : Rock wedge stability is a common concern in underground excavations. Since the wedge stability influences the support design, it is important to use a wedge stability analysis method that can capture factors like excavation geometry, joint parameters and properties, rock mass properties, rock cover, and stress field as accurately as possible. LÄS MER

  4. 3. Interaction for flexural column buckling : Analytical procedures compared with FE-simulations

    Master-uppsats, KTH/Bro- och stålbyggnad

    Författare :Noah Norberg; [2023]
    Nyckelord :;

    Sammanfattning : This master's thesis presents a study on the stability of steel structures under flexural bucklingconstraints. The study focuses on the interaction and behaviour of flexural buckling formulas in SSEN-1993-1-1 and Swedish BSK and the performance of actual structural members subjected to suchconstraints. LÄS MER

  5. 4. Utdragshållfasthet och styvhet i axiellt belastade skruvinfästningar i korslaminerat trä

    Kandidat-uppsats, Jönköping University/JTH, Byggnadsteknik och belysningsvetenskap

    Författare :Carl Hagvall; Svante Wallin; [2023]
    Nyckelord :KL-trä; skruvförband; skruvinfästningar; styvhet; utdragshållfasthet; utdragsprov;

    Sammanfattning : Introduction – Cross-laminated timber (CLT) is a product that is becoming increasingly common in the construction industry. CLT is categorized as homogeneous or combined, where homogeneous has the same strength classes throughout the entire cross-section and combined has varying strength classes across the cross-section. LÄS MER

  7. 5. Simulations of a self-stabilizing fully submerged hydrofoil

    Master-uppsats, KTH/Matematik (Avd.)

    Författare :Henry Jacobson; [2023]
    Nyckelord :Hydrofoil; Self-Stabilizing; Lifting Line Theory; Fluid Mechanics; Numerical Methods; Backward Differentiation Formula; Fully Submerged Hydrofoil; Bärplan; bärplansbåt; självstabiliserande; lyftande linjeteori; strömningsme- kanik; numeriska metoder; Backward Differentiation Formula; fullt nedsänkt bärplan;

    Sammanfattning : Two models of a self-stabilizing hydrofoil system is developed where the effects from the struts and hydrofoil give torques for angular rotations. Lifting line theory for the hydrofoil which can twist is used. Nonlinear versions of the models are also developed and compared to find that the linear models use valid approximations. LÄS MER