Sökning: "Pole Placement Controller"
Visar resultat 1 - 5 av 13 uppsatser innehållade orden Pole Placement Controller.
1. Evaluation of MPC and PI control on a Tribometer : Design and comparison of control methods for a Pin-on-Disc Tribometer
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : This thesis compares Model Predictive Control (MPC) and Proportional-Integral (PI) control in a pin-on-disc tribometer. The tribometer consists of a geared Direct Current (DC) motor driving a flywheel and a voice coil actuating a pin onto the surface of the flywheel. LÄS MER
2. Controller Design for a Gearbox Oil ConditioningTestbed Through Data-Driven Modeling
Master-uppsats, KTH/Maskinkonstruktion (Inst.)Sammanfattning : With the exponential development of more sustainable automotive powertrains, new gearbox technologies must also be created and tested extensively. Scania employs dynamometer testbeds to conduct such tests, but this plethora of new and rapidly developed gearboxes pose many problems for testbed technicians. LÄS MER
3. Continuum Actuator Based Soft Quadruped Robot
Master-uppsats, KTH/MekatronikSammanfattning : Quadruped robots can traverse a multitude of terrains with greater ease when compared to wheeled robots. Traditional rigid quadruped robots possess severe limitations as they lack structural compliance. LÄS MER
4. Control and balancing of a small vehicle with two wheels for autonomous driving
Master-uppsats, KTH/FordonsdynamikSammanfattning : Control and balancing of an inverted pendulum has gained a lot of attention over the past few decades due to its unstable properties. This has become a great challenge for control engineers to verify and test the control theory. LÄS MER
5. Automated Controller Design for a Missile Using Convex Optimization
Master-uppsats, Luleå tekniska universitet/RymdteknikSammanfattning : The focus of the present master thesis is the automation of an existing controllerdesign for a missile using two aerodynamic actuating systems. The motivation isto evaluate more missile concepts in a shorter period of time.The option used is trimming and linearization of a highly nonlinear missile at specic conditions. LÄS MER