Sökning: "Powder Feeding"
Visar resultat 1 - 5 av 9 uppsatser innehållade orden Powder Feeding.
1. Can iba detect the next compressor failure? : Condition-based monitoring applied to nitrogen compressor – a case study
Master-uppsats, Högskolan i Gävle/ElektronikSammanfattning : Production of steel powder is done by atomization of a molten steel stream. Atomization is done by feeding high pressure nitrogen gas through nozzles, creating jets of gas which scatter the molten steel stream into powder. The steel powder falls through the atomization tower whilst it cools and solidifies. LÄS MER
2. External powder feed
Uppsats för yrkesexamina på grundnivå, Mittuniversitetet/Institutionen för ingenjörsvetenskap, matematik och ämnesdidaktik (2023-)Sammanfattning : Syftet med detta projekt var att undersöka möjligheterna att externt mata in pulver i en PBF-maskin (en EBM-maskin, Electron Beam Melting), för att öka maskinens effektivitet. Huvudmålet med projektet var att designa ett sätt att leverera pulver till byggkammaren från en extern källa. LÄS MER
3. Wood powder production with a novel milling technology : analysis of specific energy consumption and of the product’s bulk properties
Uppsats för yrkesexamina på avancerad nivå, SLU/Department of Forest Biomaterials and Technology (from 131204)Sammanfattning : The interest for lignocellulose biomass has grown strongly in the last decades due to its potential to substitute fossil fuels. Pre-processing of biomass is of-ten needed to enable utilization of its full potential. A common pre-processing step is milling where the biomass is fractionated into wood powder usable for e.g. LÄS MER
4. Utveckling av insatsmodul till en Arcam S12 EBM-maskin : För möjliggörande av småskaliga tester med mindre pulveråtgång
Kandidat-uppsats, Mittuniversitetet/Avdelningen för kvalitets- och maskinteknikSammanfattning : Arbetet behandlar utvecklingsprocessen för en insats till en ARCAM S12 Electron Beam Melting-maskin. Behovet består i att dagens maskin kräver en full tank med tillverk-ningsmaterial för att kunna användas. LÄS MER
5. Study of the effect of process parameters in laser blown powder with superalloys : Varying laser power and scanning speed, analyzing material properties
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : Additive manufacturing (AM) is a growing process interesting many companies in many industries. Thereare multiple processes within the familty of AM, but this study focuses on laser blown powder (LBP). LBP involves a laser beam focused on the substrate with powder being blown into the laser beam. LÄS MER