Sökning: "Selective Laser Melting SLM"
Visar resultat 1 - 5 av 25 uppsatser innehållade orden Selective Laser Melting SLM.
1. Additively Manufactured Rare Earth Free Permanent Magnets
Master-uppsats, Uppsala universitet/Tillämpad materialvetenskap; Uppsala universitet/Oorganisk kemiSammanfattning : It’s well known that MnAl(C) material consists of a metastable phase (τ) with promising ferromagnetic properties, produced either by controlled cooling from the high-temperature hexagonal ε-phase or rapid cooling that freezes the ε-phase followed by low-temperature annealing. Due to the high cooling rates involved, additive manufacturing (AM) especially selective laser melting (SLM), has been identified as a possible method to retain the high-temperature ε-phase, hence containing a potential capacity to produce permanent magnets upon low-temperature annealing. LÄS MER
2. Powder Rheology within AM production : Evaluating Compressibility, Permability, & Aeration for 316L Powders Within SLM Processes
M1-uppsats, Högskolan i Borås/Akademin för textil, teknik och ekonomiSammanfattning : Additive manufacturing with the use of metals have been a steadily increasing field, being able to create products with a higher degree of complexity than traditional processing techniques. SLM is a popular AM process that uses metal powder as feedstock, and one of the key components of this process is the powder rheology. LÄS MER
3. The Effect Of Sub Tx Heat Treatments On The Magnetic Properties Of An Fe-based Bulk Metallic Glass
Kandidat-uppsats, Uppsala universitet/MaterialfysikSammanfattning : Metallic glasses produced with Selective Laser Melting (SLM) often contain internal mechanic stress. This internal stress can have an impact on the magnetic properties of the material due to its connection to the magnetic anisotropy of the material. LÄS MER
4. Experimental pressure loss analysis in a mini tube for a fully developed turbulent airflow. : Mini channels of lengths 22.5 mm to 150 mm in length with a constant diameter of 1.5 mm
Master-uppsats, Linköpings universitet/Mekanisk värmeteori och strömningsläraSammanfattning : The cooling systems in a gas turbine are especially important as the turbine blades and vanes are exposed to extreme temperatures. The relatively cool air is extracted from the compressors and fed to the turbines to cool the turbine blades. LÄS MER
5. Mechanical and tribological characterization of additive manufactured Co-alloyed tool steels aimed for cutting tool bodies
Magister-uppsats, Högskolan Dalarna/Institutionen för information och teknikSammanfattning : A drill tool body operates under tough cutting conditions where it is subjected to severe rubbing at the drill flute margin by the sliding chips. The tool wear caused by the contact stresses of the high-speed sliding chips is one of the common damage mechanisms observed in drill tool bodies. LÄS MER