Sökning: "SiO2 coating"
Visar resultat 1 - 5 av 7 uppsatser innehållade orden SiO2 coating.
1. Development of a Method to Predict the Adhesion of Industrial Paint Coating
Master-uppsats, KTH/Fiber- och polymerteknologiSammanfattning : I samarbete med Sherwin-Williams AB, utvecklades en metod med kontaktvinkelmätning för att teoretiskt uppskatta vätbarhet och vidhäftningsförmåga av industriella färger på stålsubstrat. Optisk tensiometer och Youngs ekvation kombinerat med OWRK beräkningsmodell användes för att bestämma ytenergier. LÄS MER
2. Silicon surface passivation via ultra-thin SiO2, TiO2, and Al2O3 layers
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Energy traps at the silicon surface originating from discontinuities in the lattice is detrimental to the performance of solar cells. Acting as recombination centers, they offer a location where the charge carriers may easily return to their original energy band after excitation. LÄS MER
3. Optical Properties of Silicon Nanopillar Arrays for Biosensing
Master-uppsats, KTH/Skolan för informations- och kommunikationsteknik (ICT)Sammanfattning : Biosensing is currently a growing research field which is relevant for different applications, for instance in health care. Sensitive and cheap biosensors are required, preferably as simple as possible in their working principle. LÄS MER
4. PROCESSUTVECKLING FÖR JÄRNBASERADE HÅRDMAGNETISKA PULVER UTAN SÄLLSYNTA JORDARTSMETALLER
Master-uppsats, Lunds universitet/MaterialteknikSammanfattning : An experimental study was performed, aimed at finding a way to produce single crystalline powder of pure (Fe0.7Co0.3)2B with a particle size of 100-200nm. This was done with the ultimate goal of producing a hard magnetic ferrite powder for powder metallurgical production of permanent magnets. LÄS MER
5. A process recipe for bonding a silicone membrane to a plastic substrate
Kandidat-uppsats, Institutionen för teknikvetenskaperSammanfattning : A spin-cast silicone membrane has been successfully bonded between two injection-molded microstructured plastic discs. This sandwich structure creates a useful platform for mass production of microfluidic systems, provided that the bonds are leakproof. LÄS MER