Sökning: "Solid Mechanics"

Visar resultat 6 - 10 av 111 uppsatser innehållade orden Solid Mechanics.

  1. 6. Technical requirements for mooring goods in the Swedish Navy

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Dennis Ekman; [2023]
    Nyckelord :Mechanics; Solid Mechanics; Navy; FMV; Defence; Ship; Boat; Hawser; Mooring; Mooring goods; FEM; Mekanik; Hållfasthetslära; Marinen; Marin; Flottan; FMV; Försvaret; Skepp; Båt; Tågvirke; Förtöjningsgods; Tamp;

    Sammanfattning : The objective of this thesis is to generate and enhance technical specifications for mooring equipment designated for the Swedish Navy, as commissioned by the Swedish Defence Materiel Administration. The technical specifications will primarily emphasize the capacity to endure various load scenarios imposed by the Swedish Defence on the mooring equipment. LÄS MER

  3. 7. Modeling for characterization of continuous casting simulator using CFD

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Filip Reineholm-Hult; [2023]
    Nyckelord :Continuous casting; CFD; computational fluid dynamics;

    Sammanfattning : In order to improve the continuous casting process of steel, it’s important to have an understanding of the fuid mechanics of the casting process. As experiments on a real caster are usually impractical, both physical and numerical modeling are important for creating this understanding. LÄS MER

  4. 8. Experimental Testing of EPS-foam

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Carl Göransson; Erik Arnald; [2023]
    Nyckelord :Solid Mechanics; EPS; Experimental testing; Hållfasthetslära; EPS; Experimentell testning;

    Sammanfattning : The aim of this master thesis was to investigate the mechanical properties of ExpandedPolystyrene (EPS) through experimental testing. The strain was measured on thespecimen’s surface with Digital Image Correlation (DIC), in order to investigate howthe first principal strain at fracture initiation depends on the loading of the material. LÄS MER

  5. 9. Modelling of a Glued Bolt Joint in Finite Element

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Tove Boivie; [2023]
    Nyckelord :Solid Mechanics; finite element method; adhesive; bolt; hybrid joint; Hållfasthetslära; finita element metoden; lim; skurv; hybrid förband;

    Sammanfattning : This report presents a master thesis project at KTH at the school of Engineering Science. The project is done in collaboration with ABB Robotics, a company who develops industrial robots. A robot consists of several parts and the last structural part is the wrist. LÄS MER

  7. 10. Projection Nut Welding to High- and Ultra-high Strength Steels

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Love Englund; [2023]
    Nyckelord :mechanics; solid mechanics; material mechanics; welding; resistance welding; projection welding; nut welding; high strength steel; ultra high strength steel; uhss; coated boron steel; mekanik; hållfasthetslära; materialvetenskap; svetsning; motståndssvetsning; projektionssvetsning; muttersvetsning; belagt borstål;

    Sammanfattning : In an effort to increase the fuel efficiency of cars more widespread use of higher strength steels is seen for their high strength-to-weight ratio. Thesesteels are more limited in their formability and tendency to harden than conventional steels, complicating manufacturing. LÄS MER