Sökning: "Thermal power"
Visar resultat 16 - 20 av 642 uppsatser innehållade orden Thermal power.
16. Preliminary Design of a 30 kN Methane-Oxygen-powered Electric-Pump-fed Liquid Rocket Propulsion System
Master-uppsats, Luleå tekniska universitet/RymdteknikSammanfattning : The design of a liquid rocket propulsion system, unlike that of a standalone system, is intertwined with the overall development of a number of associated systems and is influenced by a multitude of conditions and considerations: from the requirements needed to accomplish the mission to the rationalizations involved behind the development of each rocket system and/or component. In my thesis, the preliminary design of a “new generation” 30 kN rocket engine driven by an electric pump feed system and running on liquid methane and liquid oxygen is performed. LÄS MER
17. Tuning Photovoltaic Properties of Two-dimensional Molybdenum Disulfide by Alloying: An ab initio study
Master-uppsats, KTH/MaterialvetenskapSammanfattning : Addressing the urgent need for innovative energy solutions amidst increasing environmental concerns, the focus on photovoltaic solar cells is intensifying. Currently limited by the Shockley-Queisser limit, conventional silicon-based solar cells offer a maximum power conversion efficiency of 32%. LÄS MER
18. Possibility for Positive Energy Retrofit in Borlänge
Magister-uppsats, Högskolan Dalarna/Institutionen för information och teknikSammanfattning : The built environment accounts for 40% of annual carbon dioxide (C02) emissions. Among the total emissions, building operations generate approximately 27% annually. Other than this, building materials, infrastructural materials, and construction (embodied carbon) contribute to an additional 13% annually [1]. LÄS MER
19. Mapping and analysis of an internal heating network at Holmen Paper Braviken
Master-uppsats, Linköpings universitet/EnergisystemSammanfattning : The pulp and paper industry is the most energy intensive industry in Sweden. Most of the energy usedaims to supply the large amount of heat to the production processes that is required to produce pulp andpaper . LÄS MER
20. Reprocessing and Characterization of Polybenzimidazole for High-Temperature Polymer Electrolyte Membrane Fuel Cells
Master-uppsats, Lunds universitet/Centrum för analys och syntesSammanfattning : A reprocessing method of poly(2,2’-(m-phenylene)-5,5’-bibenzimidazole) (PBI) membranes recovered from the production line of High-Temperature Polymer Electrolyte Membrane Fuel Cells (HT-PEMFC) at Blue World Technologies (BWT) has been developed in order to reduce material loss in the production. Redissolution of scrap PBI membranes in poly(phosphoric acid) (PPA) and phosphoric acid (PA) was successful and the subsequent washing procedure produced PBI that could be redissolved in N,N-dimethyl acetamide (DMAc) and suitable for solution casting of new membranes. LÄS MER