Sökning: "Unigraphics"

Visar resultat 1 - 5 av 6 uppsatser innehållade ordet Unigraphics.

  1. 1. Spring back behaviour of hole expansion with various punch movement and positions.

    Magister-uppsats, Institutionen för ingenjörsvetenskap

    Författare :Kranthi Kumar Balina; [2011]
    Nyckelord :Angles; Displacement; Mesh; Radius; Sheet metal; Stress; Strain; Spring back; Thickness;

    Sammanfattning : A methodology for making a spring back behaviour of hole expansion in gas tank. Work is initiated for SAAb automobile and the geometry of model is created by using the software’s called Unigraphics and hyper mesh and secondly the simulation of the model is done in Ls-dyna to know the spring back behaviour of hole with various depth and positions of the punch. LÄS MER

  3. 2. Method to off-line program robotized metal deposition

    Magister-uppsats, Institutionen för teknik, matematik och datavetenskap

    Författare :Jonas Berg; Jarmo Luukkonen; [2007]
    Nyckelord :Robotar; Svetsning; Vovo Aero Corporation; CAM;

    Sammanfattning : This report is a ten credit degree project and is aimed at technically skilful personnel at Volvo Aero Corporation and at the University West. The goal of the project is to create a robot program that can manufacture a part by Metal Deposition from a 3-D CAD model (Unigraphics) via a CAM module and a CAR program (IGRIP) to an ABB robot. LÄS MER

  4. 3. Rapid Load Path Design of Jet Engine Component using Knowledge Based Engineering

    Magister-uppsats, Blekinge Tekniska Högskola/Avdelningen för maskinteknik

    Författare :Loganathan Rajagopal; [2005]
    Nyckelord :Knowledge Based Engineering; Intermediate Case; Unigraphics; Knowledge Fusion; Load Path; Computer Aided Design;

    Sammanfattning : Knowledge Based Engineering (KBE) is becoming a powerful tool to reduce the lead time in design activities of aircraft and automotive industries. In this thesis work, an application has been built using this recent technology to reduce the lead time in the conceptual design phase of an Intermediate Case which is a component in a jet engine. LÄS MER

  5. 4. Concept development of a single wishbone independent rear suspension

    Uppsats för yrkesexamina på avancerad nivå, Institutionen för teknik, matematik och datavetenskap

    Författare :Matthijs Klomp; Anders Nygren; [2005]
    Nyckelord :Fordonsteknik; Chassi; Unigraphics; SAAB; Produktutveckling; Hjulupphängning;

    Sammanfattning : .... LÄS MER

  7. 5. CFD-simulering av luft- och temperaturflöde i ett apparatskåp

    Uppsats för yrkesexamina på avancerad nivå, Institutionen för teknik, matematik och datavetenskap

    Författare :Magnus Svedjeland; [2004]
    Nyckelord :CFD; CAD; Kraftelektronik AB; UniGraphics; Kylning;

    Sammanfattning : .... LÄS MER