Sökning: "Volvo Cars Body Components"

Visar resultat 1 - 5 av 21 uppsatser innehållade orden Volvo Cars Body Components.

  1. 1. Pre-Straining Operation : Prediction of Strain Paths Within a Forming Limit Diagram

    Uppsats för yrkesexamina på avancerad nivå, Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Författare :Elin Olofsson; Mohammed Al-Fadhli; [2022]
    Nyckelord :Forming Limit Diagram; Forming Limit Curve; Non-Linear Strain Paths; Pre-Straining; Sheet Metal Forming.;

    Sammanfattning : In a Sheet Metal Forming (SMF) operation, complex geometries in multi-stage forming processes are mostly common. Forming a blank, major and minor straining willoccur. Follow the straining of the blank elements over the forming process will provide its strain paths. LÄS MER

  3. 2. Comparison of Accuracy in Sheet Metal Forming Simulation Software

    Master-uppsats, Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Författare :Alexander Torstensson; [2022]
    Nyckelord :Sheet Metal Forming; Triboform; Autoform;

    Sammanfattning : As competition in the car market increases, the techniques for car manufacturing are developed and becomes more advanced to be able to keep up with the pace. The development process of car body components has shifted over the years to involve more simulation driven testing than ever before to save time and money in the early stages of development. LÄS MER

  4. 3. Design and Analysis of a Generic Fixture for Physical Squeak and Rattle Prediction

    Master-uppsats, Linköpings universitet/Maskinkonstruktion

    Författare :Darshan Bandihalli Mahalingaiah; Ajayvarma Sagi; [2020]
    Nyckelord :Finite Element Analysis; Topology Optimization; Design and analysis; Squeak and Rattle; Biw; Cockpit.;

    Sammanfattning : The thesis work investigates the possibility of replacing the Body-In-White (BIW) sections used in a physical test with a fixture. Volvo-cars perform several sub-system tests on its car components taken from various car models for different issues. LÄS MER

  5. 4. Simulation and Modelling of Injection Molded Components : Fiber Reinforced Polymers in Powertrain Mounts

    Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

    Författare :Hanna Jakobsson; [2020]
    Nyckelord :Material modelling; polymer composites; FRP; orthotropic; powertrain mount; vehicle engineering; Digimat; Material modellering; polymera kompositer; ortotropisk; motorupphängnig; Digimat;

    Sammanfattning : Powertrain mounts' purpose is to mount the engine and the gearbox in the car. Besides that, it isolate the body from the powertrain movements and road excitation. The most common material in powertrain mounts bracket is aluminum but lately, fibre reinforced polymer (FRP) has been acting as a substitute for the aluminum. LÄS MER

  7. 5. Manufacturing process re-engineering of a production line through Industry 4.0 to obtain the best quality and reduced wastes: the case in projection welding

    Uppsats för yrkesexamina på avancerad nivå, Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Författare :Mattias Ghanem; [2020]
    Nyckelord :Lean; Process Engineering; Digitalization; Projection Welded Elements; Industry 4.0;

    Sammanfattning :   Background This research study is in collaboration with the Blekinge Institute of Technology and Volvo Cars Body Components (VCBC). VCBC is a car manufacturer that manufactures car body components in Olofström, Sweden. LÄS MER