Sökning: "WAAM"
Visar resultat 1 - 5 av 7 uppsatser innehållade ordet WAAM.
1. Wire and Arc Additive Manufacturing : Topology Optimised Vehicle Component
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Wire and arc additive manufacturing (WAAM) is a manufacturing method using a numerical controlled motion system and a welding system to additively manufacture three dimensional components. The motion system is programmed from three dimensional computer aided design model data (3D-CAD) of the intended geometry which is then sliced in to layers and welded on additively. LÄS MER
2. Hardware-in-the-loop based-real-time simulations in robotic additive manufacturing
Master-uppsats, Linnéuniversitetet/Institutionen för maskinteknik (MT)Sammanfattning : Hardware-in-the-loop (HiL) is a concept for testing physical equipment by connecting itto a mathematical representation (model) of the physical process. HiL-testing reduces thecost and saves time before testing the physical equipment (hardware) on the real (physical)process. LÄS MER
3. Topologioptimering inom Svetsbaserad Additiv Tillverkning : applicerat på Pendelarm för Bandsystem
Kandidat-uppsats, Högskolan Väst/Institutionen för ingenjörsvetenskapSammanfattning : Examensarbetet har genomförts inom området produktutveckling på institutionen för ingenjörsvetenskap. Delar av arbetet utfördes på produktionstekniskt centrum (PTC). LÄS MER
4. Fatigue and microstructural study of a 316L austenitic stainless steel marine component produced by Wire Arc Additive Manufacturing (WAAM)
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : In this study, the fatigue- and fracture properties and microstructure of a marine component of austenitic stainless steel 316L manufactured with the novel method Wire Arc Additive Manufacturing were investigated and compared with data from literature. The purpose was to find a critical flaw size in the material related to its fatigue life. LÄS MER
5. Wire and Arc Additive Manufacturing : Pre printing strategy for torque arm
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Wire and Arc Additive Manufacturing (WAAM) is a novel Additive manufacturing method. It is a high deposition rate process which can be suitable for producing low to medium quantities of medium to large sized components. Because it is such a novel method, there are still somechallenges to solve for the method to be useful. LÄS MER