Sökning: "asynkronmotor"
Visar resultat 6 - 10 av 15 uppsatser innehållade ordet asynkronmotor.
6. Utvärdering av roterande borstlösfrekvensomformare tillspårledningar
M1-uppsats, KTH/Hälsoinformatik och logistikSammanfattning : Spårledningar används inom tunnelbanan för att visa tågets position samt bestämma tågets hastighet genom att bryta spänningsamplituden i signalen vid olika frekvenser. Frekvensen till spårledningen fås från en roterande frekvensomformare. I dagens anläggning används roterande frekvensomformare med borstar. LÄS MER
7. Konceptstudie av universell testrigg för växellådor
M1-uppsats, Linnéuniversitetet/Institutionen för maskinteknik (MT)Sammanfattning : Det här examensarbetet skildrar en konceptstudie och kostnadsuppskattning av enuniversell testrigg för växellådor. Arbetet har genomförts på uppdrag av SwepartTransmission AB och har resulterat i koncept- och komponentförslag samtkostnadsuppskattning av ett universellt test system av växellådor... LÄS MER
8. Experimental Comparison of Losses in a Grid-connected and M2C-fed 11kW Induction Motor
Uppsats för yrkesexamina på avancerad nivå, KTH/Elektrisk energiomvandlingSammanfattning : This thesis analyzes the power losses in induction machines and how the losses depend on the harmonic content of the applied voltages. Two cases are compared, one case where a machine is fed with a sinusoidial voltage and one case with a modular multilevel converter (M2C). LÄS MER
9. Design of a Synchronous Reluctance Motor Assisted with Permanent Magnets for Pump Applications
Uppsats för yrkesexamina på avancerad nivå, KTH/Elektrisk energiomvandlingSammanfattning : This Master thesis focuses on the design of a high efficiency Permanent-Magnet-Assisted Synchronous Reluctance Motor (PMASynRM) intended for pump applications. The new motor is designed to replace an existing Induction Motor (IM) in a pump product. The basic principles of SynRM, and PMASynRM Motors and a good analytical model were introduced. LÄS MER
10. Experimental Transient Behaviour Characterisation of Induction Motor fed by Variable Frequency Drives for Pump Applications
Uppsats för yrkesexamina på avancerad nivå, KTH/Elektrisk energiomvandlingSammanfattning : The use of variable frequency drives in centrifugal pump applications has raised the question of how to select a drive. Clogging obstacles in waste water applications create unknown transient loads for the pump system. A sudden load increase occurrence can clog the pump if the drive cannot supply enough current to reach the motor’s torque demand. LÄS MER