Sökning: "clogging"

Visar resultat 1 - 5 av 73 uppsatser innehållade ordet clogging.

  1. 1. Modelling the chemical recycling of plastic waste via pyrolysis and analysing integration with existing refinery infrastructure

    Master-uppsats, Lunds universitet/Kemiteknik (CI)

    Författare :Simon Dahl; [2023]
    Nyckelord :Pyrolysis; Recycling; Integration; Modelling; Simulation; Techno-economic; Plastic; Chemical engineering; Technology and Engineering;

    Sammanfattning : Current plastic management is unsustainable as large amounts of plastic end up landfilled or in the ocean, necessitating an expansion of waste management infrastructure. Pyrolysis is a viable chemical recycling option, and in this report a pyrolysis model is constructed in Aspen Plus. LÄS MER

  3. 2. Water quality improvement of highway runoff by the filter material D-Rainclean : A five-month field trial

    Master-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknik

    Författare :William Gulding; [2023]
    Nyckelord :Adsorption; D-Rainclean; metal removal; Reactive filter; stormwater treatment;

    Sammanfattning : Highway runoff and its pollutants are of growing concern. These pollutants require treatment as their concentration often are increased. A common removal method is the use of sedimentation ponds that removes particulates through gravity. LÄS MER

  4. 3. Operating procedures and evaluation of a carbon capture pilot plant

    Master-uppsats, Lunds universitet/Kemiteknik (CI)

    Författare :Isac Logeke; [2023]
    Nyckelord :Carbon Capture and Storage; CCS; AMP DMSO; amine absorption; pilot plant; operating procedures; chemical engineering; Chemistry;

    Sammanfattning : The rise in global emissions of carbon dioxide and the need for new technologies to combat climate change has prompted extensive research into carbon capture methods. This master thesis focuses on a novel carbon capture absorption technology, developed at Lund University, that utilizes the amine 2-amino-2-methyl-1-propanol (AMP) in the organic solvent dimethyl sulfoxide (DMSO) to capture CO2. LÄS MER

  5. 4. Konstruktion av extruderingsmaskin för eget bruk

    M1-uppsats, KTH/Produktionsutveckling

    Författare :Axel Athley; Victor Johnsson Kronovall; [2023]
    Nyckelord :3D-printing; PLA; Extruding; Recycling; Filament; Construction; 3D-skrivning; PLA; Extrudering Strängpressning ; Återvinning; Filament; Konstruktion;

    Sammanfattning : I och med att additiv tillverkning blir allt vanligare i dagens samhälle kommer dess ekologiska, samt ekonomiska effekter bli alltmer tydliga och viktiga att ta i beaktning. Tekniken utvecklas och är numera tillgänglig för i stort sett alla. Detta har gjort att 3D-skrivare bland privatpersoner blivit vanligt förekommande. LÄS MER

  7. 5. Effects of Maintenance on the Efficiency of NBS for Urban Flood Management

    Master-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknik

    Författare :Julia Markström; [2023]
    Nyckelord :Stormwater management; Nature-Based Solutions NBS ; Maintenance; Efficiency; Runoff volume reduction; Dagvattenhantering; Natur-baserade lösningar; Underhåll; Effektivitet; Dagvattenreducering;

    Sammanfattning : As rain events are likely to intensify and the proportion of impervious areas in cities increases, greater demands are put on stormwater management. Nature-Based Solutions (NBS) have become more popular over the past decades to be integrated into the stormwater strategy in order to reduce the volume of runoff in cities. LÄS MER