Sökning: "cracked"

Visar resultat 1 - 5 av 66 uppsatser innehållade ordet cracked.

  1. 1. Fracture simulation with a hyperelastic phase field model

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Adrien Fradet; [2023]
    Nyckelord :Fracture; Phase field modeling; Hyperelasticity; Brott; fasfält-methoden; hyperelasticite;

    Sammanfattning : The phase field method is a versatile tool to study crack initiation and propagation in systems with complex geometries. Based on a variational formulation of the equilibrium equations, the sharp crack topology is regularized by a crack with diffusive edges and the damage is described by a continuous phase field variable. LÄS MER

  3. 2. Impact of Residual Stress on the Warm Pre-Stressing Effect

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Emil Danielsson; [2023]
    Nyckelord :Warm Pre-Stressing effect; Residual stress; Cleavage fracture; Ferritic Steel; Fracture mechanics; Varm förspänning; Restspänningar; Klyvbrott; Brottmekanik; Ferritiskt stål;

    Sammanfattning : Irradiation of a reactor pressure vessel (RPV) causes a shift of the ductile to brittle transition region towards higher temperature regions. In the event of a pressurized thermal shock (PTS), where the temperature drops drastically, the ductile to brittle transition region might be entered for irradiated ferritic steel. LÄS MER

  4. 3. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Alfred Norberg; [2023]
    Nyckelord :Crack depth measurement; RMG 4015; ACPD; Damage Mechanism; Evaluation; FEM Simulation; Sprickdjupsmätning; RMG 4015; ACPD; Skademekanism; Utvärdering; FEM-simulering;

    Sammanfattning : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. LÄS MER

  5. 4. Experimental studies of radiation damage in uranium nitride

    Master-uppsats, KTH/Fysik

    Författare :Maria Giamouridou; [2023]
    Nyckelord :uranium nitride nuclear fuel; advanced nuclear fuel; uranium nitride fabrication; uranium nitride characterisation; Spark Plasma Sintering; proton irradiation; irradiation damage; TANDEM accelerator; irradiation induced cracking; irradiation induced hardening; irradiation induced swelling; hydrogen implantation; dislocation loops; kärnbränsle av urannitrid; avancerat kärnbränsle; tillverkning av urannitrid; karakterisering av urannitrid; Spark Plasma Sintering; protonbestrålning; strålningsskador; TANDEM-accelerator; strålningsinducerad sprickbildning; strålningsinducerad härdning; strålningsinducerad svällning; väteimplantation; dislokationsloopar;

    Sammanfattning : The effect of proton (H+) irradiation on uranium mononitride (UN) and UN compositefuel with 10 at.% ZrN (UN10at%ZrN) was examined. Protons of 2 MeV with fluences of1E17, 1E18, 1E19 and 1E20 ions/cm2 were accelerated towards the fabricated samples in orderto investigate the evolution of the micro-structure. LÄS MER

  7. 5. Low-carbon hydrogen production from waste plastics via pyrolysis and in-line catalytic cracking process

    Master-uppsats, KTH/Kraft- och värmeteknologi

    Författare :Yanghao Jin; [2022]
    Nyckelord :Pyrolysis; catalytic cracking; plastics recycling; biochar catalyst; hydrogen production; Pyrolys; katalytisk krackning; återvinning av plast; biokol; produktion av väte;

    Sammanfattning : This study develops a novel pyrolysis process combined with in-line catalytic reforming toproduce high purity hydrogen and carbon products from waste plastics. The input resource is waste plastic material in the form of discarded Covid masks. LÄS MER