Sökning: "examensarbete hållfasthetslära"
Visar resultat 1 - 5 av 26 uppsatser innehållade orden examensarbete hållfasthetslära.
1. Validation of sPEeD: A study aimed to validate the analysis program sPEeD12953
Master-uppsats, KTH/HållfasthetsläraSammanfattning : Shell boilers used in Sweden and Europe has to be certified before being used. Kiwa Sweden performs the role as an accredited third party for control services within most industries in Sweden. Kiwa Sweden has acquired an analysis program called sPEeD12953 from the danish company Danish Exergy Technology (DXT). LÄS MER
2. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms
Master-uppsats, KTH/HållfasthetsläraSammanfattning : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. LÄS MER
3. Approximating Damping Coefficient of Bolted Joints using the Finite Element Method
Master-uppsats, KTH/HållfasthetsläraSammanfattning : Bolted joints are important due to their energy dissipation property in structures,but the damping mechanism is also highly nonlinear and localized. The goal ofthis thesis is to develop an accurate method for modeling bolted joint dampingin large structures using finite element (FE) software. LÄS MER
4. Experimental Testing of EPS-foam
Master-uppsats, KTH/HållfasthetsläraSammanfattning : The aim of this master thesis was to investigate the mechanical properties of ExpandedPolystyrene (EPS) through experimental testing. The strain was measured on thespecimen’s surface with Digital Image Correlation (DIC), in order to investigate howthe first principal strain at fracture initiation depends on the loading of the material. LÄS MER
5. Modelling of a Glued Bolt Joint in Finite Element
Master-uppsats, KTH/HållfasthetsläraSammanfattning : This report presents a master thesis project at KTH at the school of Engineering Science. The project is done in collaboration with ABB Robotics, a company who develops industrial robots. A robot consists of several parts and the last structural part is the wrist. LÄS MER