Sökning: "force plate"
Visar resultat 16 - 20 av 102 uppsatser innehållade orden force plate.
16. Design of column bases concerning bending and shear nibs
M1-uppsats, KTH/Byggteknik och designSammanfattning : The purpose of the thesis is to find out how to design column bases with conventional methods presented by European standards and codes, but above all from the Steel Construction Institute's handbook on structural joints and compare it with finite element analyses. However, today there are no good instructions for how column bases exposed to multiaxial bending should be designed, where assumptions based on structural mechanics also was compared with computer tools. LÄS MER
17. Undertray Design and Development Procedure with CFD : An Optimization Study of Different UndertrayDesigns with CFD Computations
Master-uppsats, KTH/Strömningsmekanik och Teknisk AkustikSammanfattning : Race car aerodynamics has played a vital part to improve lap times over the years of motor racing. Having good road adhesion with slick tires and aerodynamic downforce will increase the vehicles maximum lateral force and thus higher cornering speeds can be achieved. LÄS MER
18. Performance of joints for glued laminated timber exposed to the ISO fire temperature curve
Master-uppsats, Lunds universitet/Avdelningen för BrandteknikSammanfattning : As society becomes more ecologically conscious there is a push toward the use of materials with a smaller environmental burden, one of these materials is glulam (GLT), which has gained a lot of traction in recent years not only for ecological reasons but for its ease in manufacture, transport, noise dampening, etc. The focus of this project was to evaluate the influence of different joint configurations on the fire performance of glulam members. LÄS MER
19. Shear stiffness of cross laminated timber diaphragms - A study of the influence of connection and member stiffness
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperSammanfattning : Since ancient times, buildings have been constructed with the use of timber and during the modern era, new types of timber products have been developed. Today, more constructions, especially residential buildings are being built with timber as the main load-bearing material. LÄS MER
20. Understoppning av bergbultsbricka : En undersökning om möjlig uteslutning av arbetsmomentet
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Vid byggnation av tunnlar och bergrum används bergförstärkning för att exempelvis säkra mot nedfallande lösa block och uppsprickning av berg. En vanlig förekommande förstärkning är bergbultar i kombination med sprutbetong. Vid installation av bultar borras hål i bergväggen som sedan fylls med cementbruk. LÄS MER