Sökning: "grain angle"
Visar resultat 1 - 5 av 22 uppsatser innehållade orden grain angle.
1. Experimental Investigation of Net-Tension Capacity in Birch Plywood Gusset Plates via Mechanical Connectors and Adhesives
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : This thesis examines the mechanical behavior and performance of plywood connections withmechanical connectors and adhesive bonding to glulam. The aim is to provide insights into thecapacity and characteristics of these connections for well-founded design decisions in timberstructures. LÄS MER
2. Utredning och test av olika jordtryckskoefficienter med hänsyn till fraktionsstorlekar på stödkonstruktioner
M1-uppsats, Jönköping University/Tekniska HögskolanSammanfattning : Introduktion – En fråga har väckts kring hur jordtryck beräknas enligt en klassiskjordtryckteori som beskrivs i läroböcker så som (Sällfors,2009), Trafikverket krav och Eurocode av företaget Vara byggkonsult AB. För att skapa en bättre förståelse så togett praktiskt test fram för att mäta jordtrycket utifrån klassiska teorier och jämförs med dessa. LÄS MER
3. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections
Master-uppsats, KTH/ByggnadsmaterialSammanfattning : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. LÄS MER
4. Geomechanical testing of non-hardening grout : for determination of flowability and strength properties
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/GeoteknologiSammanfattning : Due to an increasing amount of aging tendencies in Swedish embankment dams, failures such as internal erosion has become a more common problem. Internal erosion is a phenomenon where certain soil material within the embankment dam is removed, often over a longer period of time. LÄS MER
5. Load-bearing wood connections using birch plywood : An experimental study of birch plywood gusset plates behaviour with mechanical connectors
Master-uppsats, KTH/ByggnadsmaterialSammanfattning : A growing sustainability concern is pushing the construction industry to seekalternative materials with lower environmental impact. In the last decade useof wood as load-bearing construction has become a common trend, however,connections of timber elements are still performed by the use of steel plates. LÄS MER