Sökning: "laser welding"
Visar resultat 6 - 10 av 63 uppsatser innehållade orden laser welding.
6. Laser Arc Hybrid Welding of Thicker 6000-series Aluminium Alloy : Laser-MIG butt welding of 8 mm 6082-t6
Master-uppsats, KTH/Industriell produktionSammanfattning : Laser arc hybrid welding presents many benefits but has many parameters that must be optimised for it to work. It becomes even more challenging when welding thicker aluminium with the process. Welding of thicker aluminium alloys involves a lot of different challenges, on itself. LÄS MER
7. Fatigue analysis of laser welded hairpins in electric car motors
Kandidat-uppsats, Högskolan i Skövde/Institutionen för ingenjörsvetenskapSammanfattning : Hairpins are copper filaments used in the windings in the stators of electric motors in modern times. For the motor to work, they have to be welded in pairs, normally with laser welding. Studying the fatigue response of the joint of hairpins welded with a set of values of laser welding process parameters is the main objective of this project. LÄS MER
8. Implementation of thermomechanical laser welding simulation : Predicting displacements of fusing A AISI304 T-JOINT
Kandidat-uppsats, Högskolan i Skövde/Institutionen för ingenjörsvetenskapSammanfattning : Laser welding is an advanced joining technique with the capability to form deep, narrow, and precise welds. Numerical models are used to simulate the process in attempts of predicting distortions and stresses in the material. This is done to reduce physical testing, optimize processes and enable integrated product- and process development. LÄS MER
9. Jämförelse mellan vågformsstyrda processer och konventionell spraybåge vid användning av solidtråd : Möjligheter att uppnå av Volvo CE ställda krav och potentiella vinster
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : Detta arbete har genomförts vid Volvo Construction Equipment i Braås. I nuläget används konventionell spraybågssvetsning med metallpulverfylld rörtråd i produktionen. Ett alternativ som övervägs är att byta till solidtråd. Huvudsyftet med detta arbete har varit att utreda huruvida några utvalda processer med 1. LÄS MER
10. Evaluation of welding joint methods for a prismatic battery cell module
Master-uppsats, Lunds universitet/InnovationSammanfattning : Prismatic battery cells swell due to a number of different factors, such as state of charge, temperature and irreversibly with charge cycling. Cell health can be improved by restricting the swelling of the cell, and therefore, the container which holds the cells, the module, should be able to restrict the swelling, and thus withstand the force exerted by the cells. LÄS MER