Sökning: "materialbrott"
Visar resultat 1 - 5 av 6 uppsatser innehållade ordet materialbrott.
1. Non-Linear strain paths in Sheet Metal Forming
Uppsats för yrkesexamina på avancerad nivå, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : Today's automotive requirements have resulted in complex Sheet Metal Forming (SMF) processes of Sheet Metal (SM) with reduced formability, and thus it is crucial to be able to predict formability accurately to prevent material failure during SMF. Formability predictions today utilize Forming Limit Curves (FLC)s in Finite Element Analysis (FEA), but FLCs are not valid for the Non-Linear Strain Paths (NLSP)s generated during SMF. LÄS MER
2. Numerical study of the effect of thermal ice loads on concrete dams
Master-uppsats, KTH/BetongbyggnadSammanfattning : It is essential to understand the mechanics of ice load and how it affects concrete dams located in a cold climate, such as Sweden, where the temperature becomes sufficiently cold to freeze the surface of the reservoir. The purpose of this thesis is to study ice load distribution along concrete dams, and its response during the application of an ice load. LÄS MER
3. Thermal cracking of a concrete arch dam due to seasonal temperature variations
Master-uppsats, KTH/BetongbyggnadSammanfattning : Concrete dams located in northern regions are exposed to large seasonal temperature variations. These seasonal temperature variations have resulted in cracking in thin concrete dams. Continuous monitoring and evaluation of existing dams are important to increase the knowledge about massive concrete structures and to ensure dam safety. LÄS MER
4. Dimensionering och praktiska försök av kopplingar i HD/F-plattor
Uppsats för yrkesexamina på grundnivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : Håldäck är en vanligt förekommande betongprodukt som ger lägre materialkostnadader och används bland annat där man önskar längre spännvidder för en öppnare planlösning. Strängbetong konstruerar, tillverkar och monterar prefabricerade betongelement där håldäck är en av de produkterna. LÄS MER
5. Stability analysis of a large span timber dome
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Avdelningen för KonstruktionsteknikSammanfattning : The aim of this thesis is to study the feasibility of building a timber dome with a span of 300 metres, concerning elastic stability. The load-bearing members were modelled with the properties of glued laminated timber GL30c with the dimensions 0.8×1.6 m2. LÄS MER