Sökning: "methyl methacrylate"
Visar resultat 1 - 5 av 14 uppsatser innehållade orden methyl methacrylate.
1. Morphological study of PS/PMMA-matrix on glass, related to vapour pressure, mass-fraction, and size
Kandidat-uppsats, Karlstads universitet/Institutionen för ingenjörs- och kemivetenskaper (from 2013)Sammanfattning : The objective of this study is to observe how changing amount or ratio between dried mixes of poly-methyl-methacrylate and poly-styrene change the surface appearance, and how the results might inform future design of Organic photovoltaic cells, whom are based on polymer mixtures and heavenly dependent on the arrangement of polymers. An atomic force microscope was used on glass surfaces coated in a poly-methyl-methacrylate/poly-styrene matrix and dried from either dichloromethane or ethyl-acetate to determine surface appearance. LÄS MER
2. Sustainable Polymer Production: Investigating Synthesis and Copolymerization of Cyclic Ketene Acetals
Kandidat-uppsats, KTH/KemiteknikSammanfattning : The large amount of non-degradable plastic waste has become a significant environmental concern, leading to an increased need for degradable plastics. Here in, to create degradable polymers, polyesters were produced through radical ring opening polymerization using cyclic ketene acetals. LÄS MER
3. Viscoelasticity of transparent wood-polymer biocomposites : Measuring the time-dependence of a delignified birch and poly(methyl methacrylate) composite’s mechanical properties, using digital image correlation
Kandidat-uppsats, KTH/MaterialvetenskapSammanfattning : The viscoelastic behavior of a delignified birch and poly(methyl methacrylate) (PMMA) composite was investigated, in an effort to learn more about the mechanical properties of transparent wood-polymer biocomposites. Tensile creep tests with constant load were performed for native wood, non-delignified, and delignified wood-polymer composites. LÄS MER
4. BCP Lithography Defined Arrays of InAs NWs Grown Using MOVPE with Au Seeds
Master-uppsats, Lunds universitet/Lunds Tekniska Högskola; Lunds universitet/Fasta tillståndets fysikSammanfattning : In this report we outline a detailed process flow for a quick and inexpensive implementation of large dense arrays of InAs nanowires (NWs) grown in the reactive ion etching/etched (RIE) pores of a SiO2/SiNx mask on top of an InAs/Si(111) substrate. The self-assembled (hexagonally close-packed) pattern of poly(methyl-methacrylate) (PMMA) cylinders in a poly(styrene) (PS) matrix adopted by a linear diblock poly(styrene-block-methyl-methacrylate) P(S-b-MMA) block-copolymer (BCP) was transferred to the dielectric stack (consisting of a ≈10 nm plasma enhanced chemical vapour deposition/deposited (PECVD) SiNX layer topped by a thin atomic layer deposition/deposited (ALD) SiO2 film) using a two-step RIE procedure. LÄS MER
5. Novel materials from lignocellulosic sources- can they replace thermoplastics?
Kandidat-uppsats, KTH/Fiber- och polymerteknologiSammanfattning : Plastic waste is a severe environmental problem in today's society which has been noticed and discussed during the last couple of years. A constant increase of production over the last decades hasled to a large amount of plastic waste ending up in oceans as microplastics. LÄS MER