Sökning: "optimized cross-section"
Visar resultat 1 - 5 av 14 uppsatser innehållade orden optimized cross-section.
1. The use of higher steel grades in building elements
Master-uppsats, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Structural steel is one of the main building materials used commercial. Its strength is its formality and high yield strength which allows less material overall. Steel is often divided into steel grades such as S275, S355, S420 and so forth. LÄS MER
2. Undertray Design and Development Procedure with CFD : An Optimization Study of Different UndertrayDesigns with CFD Computations
Master-uppsats, KTH/Strömningsmekanik och Teknisk AkustikSammanfattning : Race car aerodynamics has played a vital part to improve lap times over the years of motor racing. Having good road adhesion with slick tires and aerodynamic downforce will increase the vehicles maximum lateral force and thus higher cornering speeds can be achieved. LÄS MER
3. A pre-study of the static behaviour of a single diagonal timber arch bridge
Master-uppsats, KTH/ByggnadsmaterialSammanfattning : The aim of this thesis is to study and gain more insight about the static behaviour of the three hinged single diagonal timber arch bridge in different situations. The bridge was tested for static analyses for both Ultimate Limit State and Serviceability Limit State, to investigate its behaviour and if it is possible to be built at the selected location. LÄS MER
4. High Temperature Tribology in Hot Stamping
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Many automotive components are made of Al-Si coated ultra-high strength boron steel (UHSS) and are produced by hot stamping process. In this process, the workpiece is heated to an austenitizing temperature and is then formed and quenched simultaneously between the tools to achieve the desired shape and high strength. LÄS MER
5. Analysis of post-tensioned concrete box-girder bridges : A comparison of Incremental launching and Movable scaffolding system
Master-uppsats, KTH/Bro- och stålbyggnadSammanfattning : When designing a bridge it is of high importance that the geometry for the cross section is optimized for the structure. This is partly due to the influence of the amount of material needed and its impact on the budget and environment. LÄS MER