Sökning: "pile driving"
Visar resultat 1 - 5 av 21 uppsatser innehållade orden pile driving.
1. Påldrivning: Jämförelse mellan luft- och vattendriven borrning : En utredning av jämförelser avseende slitage, logistik och driftkostnader
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Skanska Grundläggning in Region Special wishes to gain an increased understanding of the extent to which it differs in the wear of percussion hammers and pilot drill crowns, depending on which driving medium is used in down-the-hole drilling, as well as logistical and economic aspects depending on the chosen method. Down-the-hole drilling means that the hammer works down in the borehole and forms one of the components at the far end of the drill string together with a drill bit. LÄS MER
2. D-band Power Amplifiers in Vertical InGaAs Nanowire MOSFET Technology for 100 Gbps Wireless Communication
Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknikSammanfattning : Two different topologies of power amplifiers (PAs) are designed in the frequency range 130-174.8 GHz for use in backhaul transmitters. These are the pseudo-differential common source (PDCS) and the single-ended stacked amplifier topologies. LÄS MER
3. Strukturella förbättringar av en markstabiliseringsmast
Master-uppsats, Mälardalens högskola/Akademin för innovation, design och teknikSammanfattning : This report has examined the possibilities of stiffening and strengthening a ground stabilization mast, in a way that a small production company can manufacture. The soil stabilization technique in question is Jet-Grouting also called injection drilling, which involves drilling to the desired depth and then letting high-pressure water jets mixed with filling mass to erode the surrounding soil mass and form pillars below the ground surface. LÄS MER
4. Modelling and simulation of vibratory driven sheet piles - Development of a stop criterion
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Byggnadsmekanik; Lunds universitet/Institutionen för byggvetenskaperSammanfattning : During excavations, steel sheet piles are often installed through vibratory driving, to establish a retaining wall that resists soil instability and ground water leakage. The method of vibratory driving is that the sheet pile is driven into the soil with a vertical vibratory motion. This is especially effective in soft soils. LÄS MER
5. Automatic monitoring of bins
Uppsats för yrkesexamina på grundnivå, Högskolan i Halmstad/Akademin för informationsteknologiSammanfattning : When a pile of scrap at Stena recycling has reached the maximum height, the loader operators need to drive around the facility to check whether or not the pile has to be emptied. This causes a lot of unnecessary driving, resolving in wear to the loaders and loss of time, but mostly the unnecessary use of diesel. LÄS MER